Volvo V60: engine stalls after cold start with slight pressure on the accelerator pedal

Data sheet
ManufacturerVolvo
Vehicle modelV60
EngineD4 2.0 16 V CDI | Engine code D4204 T5
Year of manufacture2010 - 2014
SymptomEngine stalls with slight pressure on the accelerator pedal after cold start | No fault memory entry in the control unit

Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Volvo V60: engine stalls after cold start with slight pressure on the accelerator pedal

If no clear mechanical or electrical fault can be attributed to the error mentioned above during vehicle diagnostics, one possible cause is a software error in the engine control unit. In this case, the software version must be checked and updated if necessary.

IMPORTANT

The problem has been identified by the vehicle manufacturer and rectified by upgrading the control unit software. In the event of a repair, please contact an authorized dealer. This defect may also occur in other models with the same type of engine.


This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.