In this video we show you how to professionally replace a full LED headlamp on a Mercedes-Benz W212 (model year 2014).
In just a few steps, the Luminator Halogen or Rallye 3003 Halogen (⌀ 222 mm) is transformed into a full-LED headlamp with a striking position light.
Extremely flat and easy to mount. The LED Light Bar 350, the new HELLA auxiliary driving lamp, and its big brother, the LED Light Bar 470, are setting new trends for trucks.
Carrying out diagnostics with subsequent adjustment of a xenon headlamp with an automatic headlamp leveling system.
Mounting the EasyConn hybrid lamp in a truck trailer.
Example of Skoda Octavia manufactured in 1999 – "LEDayLine" LED daytime running lights.
The first part of the video will give you helpful information about the HELLA Wheel Speed Sensor. We will explain the different types of WSS, operating principles and also explain possible causes of failure. The second part will demonstrate how to diagnose and troubleshoot a fault code of the WSS. We will be utilizing vehicle parameters, wiring diagrams and an oscilloscope for troubleshooting and to repair the vehicle.
This video will not only explain details of the IBS, we will show how the IBS monitors the energy management system of a vehicle to ensure safe and economical function of the vehicle. You will also receive helpful information of vehicle battery types, standards, specifications and terminology. The second part of the video will demonstrate how to understand the function of the IBS and will include basic troubleshooting of a failure in the energy management system utilizing vehicle parameters and an oscilloscope. Sometimes the smallest failure can result in expensive repairs if not prop
This video explains the function of an ignition coil, the different types of ignition coils including failures and causes. You will also see how to read out, diagnose and troubleshoot an ignition coil related fault code. We will show how to integrate the oscilloscope and amp clamp in the troubleshooting procedure.
In this video, we will show you the technologies of the accelerator pedals, how they work and discuss the faults. In addition, we will show the diagnosis of the element? using mega macs and tell you what to look for.
Get useful knowledge and valuable tips on the subject of turbocharger actuators. Simply and understandably prepared for you in a video.
In this video we show you the relevant installation positions and system components and explain the testing and fault diagnosis of an electric vacuum pump by using the example of an Opel.
This video shows you how to carry out a basic function check of the rain sensor and troubleshoot using a diagnostic unit.
This video provides vital repair information about replacing the parking aid.
In this video we will show you the visual inspection before diagnostics, battery inspection, alternator inspection and how to perform an inspection using the mega macs 77 diagnostic unit.
In this video we show you how to encode a car key or how to program a hand-held radio transmitter using the example of a VW Golf 5 Plus and a mega macs 77 diagnostic unit.
This video provides important repair instructions on replacing the rain-light sensor.
In this video, we show you diagnostics and repair instructions for the "lane change assistant" driver assistance system.
What should you look for? All the correct working steps at a glance.
Our short video shows you exactly what the correct work steps are.
Replacing the throttle valve including installation and removal.
Replacing the intake manifold/boost pressure sensor including installation and removal.
Replacing the air-mass sensor including installation and removal.
Replacing the EGR valve including installation and removal instructions.
Replacing the lambda sensor including installation and removal.
Diagnostics of the EGR system including the mega macs 66 diagnostic unit.
Using the example of a Mazda 6, we show in our video how to check the handbrake for faults and how to replace the handbrake cable professionally.
In this video we show you repair and maintenance of the guide bolts on a floating-type calliper.
If you feel rubbing when braking, troubleshooting should include measuring the difference in thickness on the friction ring of a brake disc.
This video clip covers wheel hub concentricity, often referred to as hub runout.
Checking the concentricity of the brake disc is an important process that should be carried out after installing a new brake disc.
If you have vehicles in your workshop with electronic differential lock (EDL), EDL/traction control system (TCS), or EDL/TCS/electronic stability control (ESC) where a chamber in the brake fluid reservoir is completely empty, or if you need to undertake special bleeding because leaks have been found, this clip is perfect for you.
If the pedal travel is too long once the brake fluid has been replaced and the brake pedal feels "soft", we recommend re-bleeding the brake system.
In this new clip on the "Brake", we look at how to bleed the brake system.
The simple way to replace the brake pads for a vehicle with an electronic parking brake.
Practical instructions on replacing brake pads, brake discs, and brake calipers on the front axle of a passenger car.