Rota LED beacon Product features | HELLA
Long service life
The lamp has no moving parts, such as a rotating mirror, etc. As a result there is no wear, and the lamp has a maximum of reliability.
Installation information
During installation of the fixed body variant
make sure that the cables passage to the Interior is sealed. This can be done, for example,
with a suitable rubber grommet or body sealant.
When using the magnetic variant, a few points should be observed, see Figure
Technical notes
Attention:
The beacon must be protected with a 5A fuse!
Product overview
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful