Mazda CX5 - Alternator control lamp comes on

Data sheet
ManufacturerMazda
Vehicle modelCX 5 (KE)
Engine code2.2 16V CDI Skyactiv-D
Year of manufacture2011-2017
SymptomsCharging system malfunction | I-stop warning lamp flashes | Alternator control lamp lights up | Overrunning alternator pulley defective

Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Error message "Charging system malfunction - engine stop possible" is displayed on the Mazda CX5

If the error message "Charging system malfunction - engine stop possible" is displayed in the instrument cluster on the above-mentioned vehicle model, one cause for this may be a defective overrunning alternator pulley. In our case study, the defect occurred immediately after the engine had been started. The alternator control lamp also came on and the i-stop warning lamp started to flash.

 

After opening the bonnet and the carrying out of a visual inspection, a damaged V-ribbed belt was immediately diagnosed as the cause. After more troubleshooting, pronounced rubber abrasion on the alternator's belt pulley was detected, which could ultimately be traced back to a defective overrunning alternator pulley.

 

A stuck overrunning alternator pulley leads to load change reactions on the belt drive and can lead to damage or, as in our case, to a tear in the V-ribbed belt.

Repair notes

In the case of this engine variant, the water pump is also driven by the V-belt. Continuing to drive with a defective V-ribbed belt can lead to overheating and engine damage. After the repair, the relevant error memory entries in the control units must be deleted.

Maintenance information

The overrunning alternator pulley, also called the alternator freewheel, must be checked regularly to ensure the functioning of the accessory drive and to avoid damage. A defective freewheel is noticeable as a result of an unsteady rotation of the accessory drive unit and the resulting noise. An alternator with an intact freewheel should come to a delayed stop when the engine is switched off.


This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost There!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.