All models with multi-function
control unit
If a customer complains about the above problem, this could be caused by moisture. Leaks may occur in the upper right area of the windshield (connection to body). This results in water penetrating into the front footwell. The water penetrates into the main cable harness (near the bulkhead) and into the multi-function control unit through the, causing the above-mentioned complaint. If this is the case, the glass pane must be sealed. In addition, the cable harness must be dried and checked for possible damages (corrosion). Thereafter, the control unit's plug connection must be checked and cleaned if necessary. If this does not resolve the complaint, the control unit must be replaced.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful