If the above-mentioned problem is detected, one possible cause may be incorrect adjustment / positioning of the stop-lamp switch.
This can cause the stop lamp to light up permanently without the brake having to be applied.
It is also possible that the error code C0161 is stored in the ABS control unit.
Check functioning of the stop-lamp switch and readjust if necessary. In the event of malfunctioning, replace the stop-lamp switch and position it correctly.
In addition, read the error code memory in the ABS control unit and delete stored errors.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.