BMW i3 - Service connections for air conditioning system | BEHR HELLA



Model year: from 08/2013

Service connections for air conditioning system

During maintenance or repair work on the vehicles listed above, the question "Where are the service connections?" arises.

To access the service connections, proceed as follows:

  • Open the hood
  • Clear out the charging box (charger etc.); Figure 1
  • Remove the screws from the charging box (6x) (Figure 2)
  • Remove the right-hand covers next to the charging box (Figures 3+4)
  • Remove the left-hand cover next to the charging box
  • Take out the charging box
  • The service connections are now visible (Figure 5)

Note: The vehicle's air conditioning system contains the refrigerant R1234yf. Quantity: 750 g

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.