Audi TT - Returning side direction indicator to good working order | HELLA


Audi TT

Model year: 2002

Returning side direction indicator to good working order

If the above-mentioned vehicle is found to have a defect in the additional side direction indicator (Fig.1) or in the bulb holder, this must be repaired as follows.

Switch off the electrical system.

- Press the direction indicator forward against the retaining clip, see arrow direction (Fig.2); and remove it from its opening in the wing.

- Remove the housing from the bulb holder (Fig.3).

- Replace light source if necessary (Fig.3).

Carry out performance check (Fig.4).

Then remount the parts in reverse order.





Direction indicator

9EL 270 107-011


WY5W = 8GP 003 594-541

Hella article no.:

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.