LED end-outline marker with integrated side marker lamp

As a leader in innovation in the field of automotive original equipment, HELLA sets new standards by using LED lighting technology. For this reason, the LED end-outline marker version stands out because of its low current consumption.The lamp is suitable for trailers, semi-trailers and special vehicles. The rubber trim provides additional protection for the lamp's head against damage.   

Technical data
Operating voltage Multi-voltage 12/24 V
Power consumption 1.8 W
Functions End-outline marker
No. of LEDs 4 LEDs
Contact EasyConn 2-pin
Quicklink connector,
AMP-SUPERSEAL connector,
6.3 mm flat receptacles or
open cable ends
Operating temperature - 40 °C to +50 °C
Protection class IP 6K9K
Type approval ECE
Versions Vertical, horizontal and short

 

  • NEW: As of now all variants are multi-voltage
  • For trailers, semi-trailers and special vehicles
  • Light head particularly protected by rubber trim
  • Clear lens made of shatterproof PMMA

PRODUCT FEATURES

High vibration resistance

Because of its new kind of design, this end-outline marker is very resistant to vibrations and shocks.
The rubber arm returns to the "0" position even after shocks and ensures stability of the lamp even at higher speeds.


Additional protection

The rubber trim provides additional protection for the lamp head against damage.


Low current consumption

Compared to bulb versions, these LED versions feature a lower current consumption and a longer lifetime.


Contact

Contact can be established with all the usual plug connections. Diverse cable lengths complete the programme, making this lamp suitable for a wide variety of applications.

PROGRAM OVERVIEW

Figure
Version		 Connection Type of mounting * Cable length Part number
Vertical 2-pin EasyConn connector housing
Angled		 Left 500 mm 2XS 011 744-011/7
Right 2XS 011 744-021/7
EasyConn 2-pin female connector housing Right 500 mm 2XS 011 744-101/7
Left 2XS 011 744-111/7
Quicklink connector Left 500 mm 2XS 011 744-071/7
Right 2XS 011 744-081/7
Quicklink connector Right 1,000 mm 2XS 011 744-181
Left 2XS 011 744-191
AMP SUPERSEAL connector Left 2,000 mm 2XS 011 744-051/7
Right 2XS 011 744-061/7
AMP SUPERSEAL connector Right 800 mm 2XS 011 744-201/7
Left 2XS 011 744-211/7
Flat receptacle 6.3 mm Left 3,000 mm 2XS 011 744-031/7
Right 2XS 011 744-041/7
Flat receptacle 6.3 mm Right 150 mm 2XS 011 744-161/7
Left 300 mm 2XS 011 744-171/7

 

 

Figure
Version		 Connection Type of mounting * Cable length Part number
Horizontal EasyConn 2-pin female connector housing Left 500 mm 2XS 011 769-011/7
Right 2XS 011 769-021/7
Quicklink connector Left 670 mm 2XS 011 769-091
Right 2XS 011 769-101
2-pin EasyConn connector housing
Angled		 Left 500 mm 2XS 011 769-617
Right 2XS 011 769-627
Flat receptacle 6.3 mm Left 3,000 mm 2XS 011 769-707
Right 2XS 011 769-687
Open cable ends Left 300 mm 2XS 011 769-697
Right 150 mm 2XS 011 769-677


 

Figure
Version		 Connection Type of mounting * Cable length Part number
short 2-pin EasyConn connector housing
Angled		 - 500 mm 2XS 011 768-011/7
EasyConn 2-pin female connector housing - 500 mm 2XS 011 768-021/7
Quicklink connector - 500 mm 2XS 011 768-001/7
AMP SUPERSEAL connector - 2,000 mm 2XS 011 768-031
Flat receptacle 6.3 mm Right 3,000 mm 2XS 011 768-061/7
Left 2,000 mm 2XS 011 768-071/7
2-pin DEUTSCH connector - 485 mm 2XS 011 768-117
Open cable ends Right 150 mm 2XS 011 768-647
Left 300 mm 2XS 011 768-657

 

* All variants can be surface-mounted on both sides (inverted). The specified type of mounting is only the most common.

LED end-outline marker with integrated side marker lamp PDF Download 2.00 MB