Coluna

With the new "COLUNA" full LED rear combination lamp, HELLA once again lives up to its reputation as a leading innovator. All 5 of the lamp's light functions (tail lamp, stop lamp, direction indicator, rear fog lamp and reverse lamp) have been equipped with LED technology. In addition, the tail light, combined with the reflex reflector, is generated using a ground-breaking large-surface LED light guide, and has been registered as a patent. With an area of 145 cm², the tail light function's homogenous illumination is particularly extensive.


Additional features, such as overvoltage, polarity reversal protection, high vibration resistance and compliance with protection class IP 6K9K (dustproof and waterproof), make the "COLUNA" a genuine HELLA highlight.

Dimensional sketch
Technical data  
Type approval ECE/ADR/EMC
E24 5879 and 5880/E24 10R 04 0071
Functions 1. Tail light with 12 red LEDs
2. Stop light with 6 red LEDs
3. Direction indicator light with 6 amber LEDs
4. Rear fog light with 6 red LEDs
5. Reverse light with 6 white LEDs
6. Rectangular reflex reflector or triangular
reflex reflector
Dimensions 300 x 130 x 40 mm
Fastening screws' hole spacing 152 mm
Specification HELLA Standard 67101 Class 7.2 Agro Plus
Protection class IP 6K9K
Contact Cable group with open ends
Cable with 7-pin EasyConn connector
Cable with 7-pin DIN AMP connector
Mounting position of variants with triangular reflex reflector Horizontal only
Mounting position of variants with rectangular reflex reflector Horizontal and vertical
Mounting from the front With screws through the lenses (included in scope of delivery)
Mounting from the rear With fastening bolts from the rear (included in scope of delivery)

 

Current consumption at 12 V at 24 V
Tail light 2.6 W – 0.2 A 2.8 W – 0.12 A
Stop light 1.8 W – 0.15 A 2 W – 0.08 A
Direction indicator light 3.3 W – 0.28 A 3.8 W – 0.16 A
Rear fog light 2.2 W – 0.18 A 2.4 W – 0.1 A
Reverse light 3.8 W – 0.32 A 5.6 W – 0.23 A

"COLUNA" full LED rear combination lamp 2VP 345 900-…
With 5 light functions for 12 V and 24 V towing vehicles and trailers

 

  • Innovative and patent-registered large-surface LED light guide for the tail-light function, combined with reflex reflector
  • Variants with rectangular reflex reflector = horizontal and vertical use/
    Variants with triangular reflex reflector = horizontal only
  • Long lifetime, low life cycle costs and extremely robust
  • Maintenance-free, fully sealed LED lamp
  • Impact-resistant lens
  • Mounted from the front (2 screws) or from the back with 2 x M8 fastening bolts

PRODUCT FEATURES

All light functions of the full LED rear combination lamp (tail lamp, stop lamp, direction indicator, rear fog lamp and reverse lamp) exclusively feature LED technology. The tail light, combined with the reflex reflector, is generated by means of a ground-breaking flat LED light guide, and has been registered as a patent. This light guide succeeds in producing a particularly homogenous illumination. As a result, the tail light function, with its large surface area of around 145 cm², is highly visible in the dark and thus enhances road safety.
12 V and 24 V variants of this extremely flat surface-mounted full LED lamp are available for towing vehicles and trailers. A range of different applications on the vehicle are possible using EasyConn or AMP connectors and the front or rear mounting options.

"COLUNA" full LED rear combination lamp PDF Download 0.38 MB