Modular trailer lamp

Modular LED hybrid trailer lamp

The modular 24 V trailer lamp by HELLA with hybrid technology is extremely versatile. Owing to the modular system and associated modularity of light sources and housing parts, the trailer lamp can be adapted flexibly to the requirements in each case.
While the design of the tail and stop light is essentially based on LED modules, all other functions can be implemented in LED or classic bulb technology. The possible combinations are almost limitless.
You can retrospectively switch from bulbs to highly energy-efficient LED technology at any time with no special tools required, which offers plenty of scope for future conversions. The same applies to the replaceable lens, which can be changed independently of the light source.
A further highlight is the junction box function with additional outputs on the rear of the housing. This means that further auxiliary or light functions, such as a side marker lamp or clearance lamp, can be easily connected.

Modular trailer lamp
Modular trailer lamp
Feu de remorque modulaire
Technical data
Type approval ECE GGVS/ADR: only full LED 2VP 340 960- ... / 340.964-... / 340.966-... / 340.967-...
Functions Tail-stop light
Direction indicator light
Reverse light
Rear fog light		 7 red LEDs
7 amber LEDs
6 white LEDs
7 red LEDs
Dimensions (L x W x H) 450 x 138 x 93.6 mm
Specification HELLA Standard 67101 Class 5.1 Trailer
Current consumption at 24 V Tail light:
Stop light:
Direction indicator light:
Reverse light
Rear fog light:
Clearance light:
Side marker light with reflector:

10 W = 0.42 A
13 W = 0.54 A
3 W = 0.13 A
2.5 W = 0.10 A
2.5 W = 0.10 A
1.2 W = 0.05 A
1 W = 0.04 A
Operating temperature -40°C to approx. 50°C
IP protection class for the lamp IP 5K4K
for the LED modules IP 6K9K

EMC approval for LED modules with active electronics

Reverse light:

Direction indicator light:

 

 

E1 035912

E1 035683
Plug connection 7-pin EasyConn plug connection
  Left lamp
Right lamp		 Amber
Blue
3 x 2-pin connector For connecting the reverse, clearance, side marker and license plate light functions  
1 x 2-pin connector Can be assigned as an option Standard: tail light  
Mounting 2 x hexagon nut M8 x 30 caulked in the housing With spring washer and hexagon nut  
Lifetime 30,000 h*  

 

* depending on the ambient temperature

  • 24 V modular multi function rear combination lamp
  • Full LED version, long lifetime and low current consumption

PRODUCT FEATURES

Function:

  • Tail-stop lights always in LED
  • All other functions possible with bulb or LED technology
  • Replaceable lens (regardless of light source)

 

Innovation:

  • Modularity of light sources and housing parts ("modular design principle")
  • With integrated electronics for controlling flashing LED side marker lamps ("Flash SMLR")
  • With integrated control unit for monitoring the LED direction indicators/simulates bulb with 21 W ("ballast unit")

 

Aftermarket relevance

  • Replacement/converting the individual parts and modules (light source "up-grade and down-grade") depending on requirements and customer application

 

Contributes to environmental protection, resource preservation
and sustainability!

  • LED indirectly reduces CO2 emissions
  • Only faulty parts are replaced and these can be individually recycled

 

Polarity reversal protection:

  • If the contact to the pole is accidentally reversed, the lamp does not suffer any damage.

 

Direction indicator failure control:

  • The patented HELLA monitoring system for direction indicators allows the lamp to be used in line with the requirements of ECE R48.
Modular LED hybrid trailer lamp PDF Download 1.22 MB