Mercedes Benz - Information on brake repairs | HELLA PAGID
Mercedes Benz
Information on brake repairs
All models with SBC brake systems
System information
With the market launch of the R230 and W211 series, series vehicles have now been fitted with the Sensotronic Brake Control (SBC) electro-hydraulic brake system for the first time. Under certain circumstances, the system runs a safety test (pre-drive check), during which the brake pressure is increased for a brief period. For this reason, the system must be deactivated before all repair operations. Failure to do so can lead to injury to the technician due to the automatic build-up of pressure.
Deactivating the brake system
A suitable diagnostic unit is required in order to deactivate the SBC system. When the system is deactivated, the system pressure is relieved and the high-pressure pump is switched off. At the same time, a red warning symbol appears on the instrument cluster.
The brake system cannot be operated when in this state. Once repair work is complete, the system must be reactivated.
Safety notice
- Repair work on SBC brake systems may only be carried out by trained specialists.
- For all repair work, please observe the safety and assembly instructions provided by the system or vehicle manufacturer in question.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful