Opel Zafira C - Tab af kølevæske | HELLA
OpelZafira CÅrgang: 2011 -Motor: A20DT/ A20DTH / A20DTJ / A20DTR / A20DTLTab af kølevæskeKøler for udstødningsrecirkulation (EGR)I ovennævnte modeller kan der opstå utæthed for kølevæske ved køleren for udstødningsrecirkulation (EGR-køleren). Ved kontrol af kølesystemet skal man være særlig opmærksom på EGR-kølerens hus. Det kan have en revne, som kølevæsken kan trænge ud af.Afhjælpning sker som beskrevet i det følgende, og der benyttes et reparationssæt (illustration) bestående af hus, 2 pakninger og 2 clips:Lad motoren køle afAfmonter EGR-kølerens hus (opsaml kølevæsken)Afmonter EGR-køleren fra husetRens pakfladerneBrug reparationssættet (res.nr.: 55590953):Monter EGR-køleren i den nye husMonter kølerens hus, og brug de nye pakningerPåfyld kølevæskeUdluft kølesystemetForetag en tæthedskontrol
Zafira C
Model year: 2011 -
Engine: A20DT/A20DTH/A20DTJ/A20DTR/A20DTL
Loss of coolant
Cooler for exhaust gas recirculation (EGR)
The above vehicles can experience a loss of coolant near the exhaust gas recirculation cooler (EGR cooler). When examining the cooling system, special attention should be paid to the housing of the EGR cooler. A crack can form that leads to a loss of coolant.
To remedy the situation, proceed as follows and use a repair kit (picture) comprising a housing, 2 gaskets, and 2 clips:
- Allow the engine to cool down
- Remove the EGR cooler housing
(collect coolant in a drip pan) - Remove EGR cooler from the housing
- Clean sealing surfaces
Use repair kit (part no.: 55590953):
- Fit EGR cooler in new housing
- Install cooler housing with the new gaskets
- Add coolant
- Bleed cooling system
- Inspect gaskets for tight fit