Télécharge
bi-hella-logo-260x44

Mini F56 - Pénétration d'eau dans l'habitacle du véhicule

Important safety note

Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Moisture in the vehicle interior caused by condensation draining from the air-conditioning system

With the above-mentioned vehicle type, water may collect in the driver or front passenger footwell. If the above-mentioned defect is detected and water ingress from the outside via body parts can be ruled out, special attention should be paid to the condensation drain below the air-conditioning unit.

Deformation of the rubber seal means that condensation can no longer drain off properly. The water collects and is not drained off as intended, but enters the vehicle interior as a result of the deformed seal. The interior carpet absorbs the water, which can lead to unpleasant odours and, under certain circumstances, mould growth.

The side panelling (Fig. 1) in the footwell must be removed to carry out the necessary checks. In order to do this, the fastening screw has to be undone and the panelling removed from the brackets. The carpet can be pressed down slightly on the side underneath the air-conditioning unit in order to check it. The rubber seal of the water drain must fit all the way round the air-conditioning unit (Fig. 2) and have no kinks in it.

An endoscope is recommended for easier inspection. In the event of a fault, traces of water are usually visible on the side of the drain, indicating that the seal does not fit properly.

One test option is to set the air-conditioning system at maximum cooling capacity. In warm ambient temperatures, this causes condensation. In the event of a fault, this condensation would then run visibly past the seal and into the vehicle interior. If kinks or traces of water are visible, the condensation drain must be replaced. If mould is visible on the interior carpet, this should also be replaced.

This fault profile may also occur in other vehicle models with comparable equipment variants.

Please note

Please always follow the repair instructions from the vehicle manufacturer when carrying out such work!

Nachdruck, Weitergabe, Vervielfältigung, Verwertung in jeglicher Form und Mitteilung dieses Dokumenteninhaltes, auch auszugsweise, ist nur mit unserer ausdrücklichen schriftlichen Genehmigung und mit Quellenangabe gestattet. Schematische Darstellungen, Bilder und Beschreibungen dienen nur zur Erklärung und Darstellung des Dokumententextes und können nicht als Grundlage für Einbau oder Konstruktion verwendet werden. Alle Rechte vorbehalten.

Cet article vous a-t-il été utile ?

Pas du tout utile
5
4
3
2
1
Très utile
Success

Wrong Captcha

Wrong Captcha

Error

Something went wrong

Super ! Encore un dernier pas.

Abonnement réussi

Rendez-vous dans votre boîte de réception et confirmez votre adresse e-mail afin de ne manquer aucune de nos mises à jour !

Préparez-vous à recevoir toutes les deux semaines dans votre boîte mail de toutes nouvelles vidéos techniques, des conseils pour la réparation automobile, des formations, des astuces de diagnostic utiles, des campagnes marketing et bien plus encore!