Ford Probe; Explorer, Windstar - compressor failure | HELLA

Ford

Type: Probe; Explorer, Windstar.

Refilling additional coolant oil for models older than 1996 - compressor failure

Refilling additional coolant oil for models older than 1996
- compressor failure

According to research results, a frequently-occurring early compressor failure is caused by the oil quantity filled by the plant. This oil quantity is too low to ensure sufficient lubricity of the system.

Ford recommends e.g., refilling approx. 60ml of oil during maintenance or minor repairs on the original air conditioning system. This quantity must be added before the system is filled with coolant. Ford's R134a systems can be distinguished from R12 systems by a special sticker on the underside of the motor hood and a beige-coloured ring on the low-pressure switch (see figures).

bi_d_airco_ford_explorer_probe_windstar_kompressoroel001

bi_d_airco_ford_explorer_probe_windstar_kompressoroel002

The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.