Opel Astra — Substituição das lâmpadas na porta da bagageira | HELLA
OpelAstra J Sports TourerSubstituição das lâmpadas na porta da bagageiraGeral:Cuidado: perigo de queimaduras; as lâmpadas ainda podem estar quentes na sequência de um funcionamento recente.Nunca tocar diretamente com as mãos na lâmpada.Substituição das lâmpadas na porta da bagageira (Figura 1)Para substituir as lâmpadas, deve proceder-se da seguinte forma:Desligar a ignição e o interruptor das luzesAbrir a porta da bagageiraRemover as coberturas de plástico (Figura 2)Posição 1: Luz traseira de nevoeiroPosição 2: Luz de marcha-atrásPosição 1: desapertar o suporte da lâmpada, rodando no sentido contrário ao dos ponteiros do relógio, e retirar (Figura 3)Substituir a lâmpada com defeito por uma novaPosicionar o suporte da lâmpada e fixar, rodando no sentido dos ponteiros do relógioPosição 2: desapertar o suporte da lâmpada, rodando no sentido contrário ao dos ponteiros do relógio, e retirarSubstituir a lâmpada com defeito por uma novaPosicionar o suporte da lâmpada e fixar, rodando no sentido dos ponteiros do relógioTestar o funcionamentoMontar as coberturas de plásticoFigura 1Figura 2Figura 3
Astra J Sports Tourer
Replacing the lamps in the tailgate
Caution: risk of burns. The lamps may still have residual heat from previous operation.
Never touch the glass bulbs of the lamps with bare hands.
Replacing the lamps in the tailgate (figure 1)
To replace the lamps, proceed as follows:
- Switch off the ignition and light switch
- Open the tailgate
- Remove plastic covers (figure 2)
Position 1: rear fog light
Position 2: back-up light
- Position 1: Loosen the lamp holder in a counterclockwise direction and remove it (figure 3)
- Replace the defective lamp with a new one
- Insert the lamp holder and fix it in position in a clockwise direction
- Position 2: Loosen the lamp holder in a counterclockwise direction and remove it
- Replace the defective lamp with a new one
- Insert the lamp holder and fix it in position in a clockwise direction
- Check function
- Install plastic covers
Figure 1
Figure 2
Figure 3