Radar sensors in driver assistance systems
Here you will find useful knowledge and handy tips relating to the lane change assistant and blind spot assistant.
Important safety note
The following technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
More and more driver assistance systems are increasingly being fitted with radar sensors for driver assistance. One advantage of this technology is that radar sensors can achieve a precise measurement result regardless of the weather. For the main part, people associate the word "radar" with aviation or shipping. These systems have long become established and proven themselves in such applications. "Radar" is the abbreviation for Radio Detection and Ranging.
Put simply, a radar unit transmits focused electromagnetic waves, known as primary signals, at the speed of light. When these waves encounter an object, they are reflected as echoes (secondary signals) and received and evaluated by the system. Direction, distance and speed can then be determined in the system's evaluation electronics.
Radar sensors are used in various assistance systems to measure distance in driver assistance systems at the front and rear.
Radar sensors for front applications, such as adaptive cruise control (ACC), have been available in various vehicles for several years now.
As driver assistance systems for preventing accidents continue to develop, there is more and more interest in radar sensors for assistance systems to the rear of the vehicle. An increasing number of vehicle models are being equipped with these sensors as standard. Sooner or later, the issue of diagnostics and repairs will therefore become part of everyday workshop life not just for brand workshops but independent ones too.
HELLA has been producing radar sensors in the 24 GHz narrow-band range for more than a decade. HELLA put its first generation of 24 GHz radar sensors into serial production back in 2005. The sensor systems are ideal for applications that have since become standard functions, such as blind spot detection, lane change assistants and rear-facing parking assistance.
The sensor records speed, angle and distance information for objects within a distance of up to 70 m behind the vehicle and then evaluates the information. The LFMSK (Linear Frequency Modulation Shift Keying) process has been used since the first generation of devices.
This process can be used to sense and determine the distance and relative speed of several objects with just one signal (chirp), the frequency of which changes over time.
In the third generation of radars, an enhanced FM variant is used. Here the modulation bandwidth is limited to max. 200 MHz. The system operates at an average transmission power of 13 dBm (EIRP) in a frequency range of between 24.05 and 24.25 GHz. The resultant spatial resolution of 0.75 m is suited to the rear-end functions undertaken. The monopulse method is used here to determine the angle. On the basis of specific signal-processing approaches, the system uses various receive paths to compare the phases of the radar reflections.
Another safety function, the exit assistant, is integrated in the fourth generation radar sensors. This detects dangerous situations, such as passing cars, before exiting the vehicle and warns all passengers.
|Measuring principle||LFMSK (Linear Frequency Modulation Shift Keying) process|
|Frequency range||24.15 GHz/ISM|
|Bandwidth||<= 200 MHz/ISM|
|Transmission efficiency||<= +20 dBm peak, EIRP|
|Cycle time||1.5 m with 200 MHz OBW|
Relative speed interval
-70 m/s to +70 m/s
|Sensing area azimuth||165°|
One technical innovation within driver assistance systems is the lane change assistant. This assistant informs the driver of potential hazards when changing lane on roads and highways with several lanes. It serves to prevent accidents and therefore helps to improve safety on the road.
In this section, the following pieces of system information are outlined taking the "Audi Side Assist" driver assistance system as an example.
The lane change assistant system consists of a master and a slave control unit with identical structures. Together with an integrated radar sensor, the two control units produce one standalone component. Above the radar sensor, the control unit is fitted with a plastic cover. This cover, also known as a "radome", is made from a special material, through which radar beams can pass perfectly.
The "master" control unit (1) is fitted behind the bumper on the left and the "slave" control unit (2) is fitted behind the bumper on the right.
Furthermore, the system has two 4 LED warning lights, integrated in the housings of the outside mirrors on the left and right.
A button, which can be used to switch the lane change assistant function on and off, is integrated in the cover above the front left door trim panel.
The function status is indicated by an LED light integrated in the button. The system stores the last set status and adopts this status when restarted.
The lane change assistant "Side Assist" takes effect from a speed of 30 km/h. The sensing area (A) of the radar sensors is approx. 50 m to the rear and approx. 3.6 m (B) to the side of the vehicle.
The system uses radar sensors to monitor the traffic behind and next to the vehicle. The area monitored includes the "blind spot" which the driver cannot see on both the driver and passenger sides.
If there is a vehicle in the monitored area and if a lane change is not taking place, the driver is informed by the LED displays in the right and left outside mirrors lighting up a little. The luminous intensity is lower so the driver is not distracted unnecessarily. In this situation, should the driver actuate the direction indicator lever for changing lane, he or she is warned by the warning lamp in the outside mirror of the corresponding side flashing intensively.
If the system senses a vehicle, the control unit in question also calculates the time remaining before a potential collision. This evaluation is used by the system to distinguish between vehicles which are approaching, flowing with the traffic and falling behind.
In order to calculate the driver information about a potential hazard situation, the lane change assistant needs numerous pieces of information. The control unit receives the information required from various sources.
The master and slave control units are linked to one another via a dedicated high-speed CAN data bus. The data exchange takes place at a transfer speed of 500 kBit/s. For further communication in the vehicle, the master control unit is linked to the diagnostics interface in order to communicate with other bus users.
|Control panel control unit||Optical and acoustic driver information about faults|
|Rain/light sensor||Informs the master control unit about the ambient lightness currently being measured in order to adjust the warning lights|
|ABS control unit||Information about wheel speed and yaw rate|
|Control unit for identifying the trailer||Trailer operation information|
|Lane tracking assistant button||Lane tracking assistant information "On or Off"|
|Comfort central control unit|| |
|Start authorisation for control unit||Information about input start authorisation and key information|
|Control unit for display and operating unit||"Warning lights brightness" driver's request|
Should the system shut down, the following information is shown in the instrument cluster's display:
|Information in the display||Cause|
|Audi Side Assist not available: Sensors blocked||The operating range and/or view of the sensors is blocked by a bike rack or similar.|
|Audi Side Assist: System fault||Due to a defective sensor, the system is no longer able to guarantee a safe function and shuts down.|
|Audi Side Assist: Not available at present||Temporary shutdown due to a defective battery or insufficient charge condition.|
|Audi Side Assist: Not available in trailer operation||Trailer operation was detected.|
The radar system is designed so that all travel situations on lanes of a normal width with one left and one right lane are covered. Despite this, there are some scenarios where the system may activate the warning lamp in the mirror even though there are no vehicles in the area critical to lane changes.
Example situations provided by the vehicle manufacturer:
For the lane change assistant to work perfectly, the bumper near the radar sensors must not be covered or bonded. In the winter, these areas should also be kept free of snow and ice.
In this video, we show you diagnostics and repair instructions for the "lane change assistant" driver assistance system.
The system functions of the lane change assistant are monitored continuously. Any errors which occur are stored in the control unit's error memory and can be read using a suitable diagnostic unit. Depending on the system, additional parameters can be displayed and used for troubleshooting.
The following diagnostics functions can be used as part of troubleshooting:
In this function, the fault codes stored in the error memory can be read out and deleted. Information about the fault code can also be called up.
In this function, the current measured values of the control unit are displayed.
Special system and control unit information can be called up here.
The various diagnostic options have been shown on the mega macs 66 diagnostic unit by way of example. The respective extent of testing and variety of functions depend on the respective system configuration of the control unit.
To ensure that the lane change assistant works safely, it must be adapted after the following work:
Calibrating the system requires not just a diagnostic unit but also a Doppler generator and a calibration panel. The test tools are arranged behind the vehicle as specified by the vehicle manufacturer. The Doppler generator simulates a moving object. The calibration process is started by the diagnostic unit and follows specified operating sequences. Within this fully automatic sequence, the control unit detects the correction values needed from the actual and target position and stores them for future distance measurements.