Installation of stop light switches with automatic adjuster

Data sheet
Spare partStop light switch
Part numbers6DD 008 622-731
VehiclesAudi, Porsche, Seat, Skoda, Volkswagen

Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.

Procedure for replacing the stop light switch

The stop light switch is equipped with an integrated mechanical adjustment device and must therefore not be operated before installation (Fig. 2)! An electrical test is only possible after installation in the vehicle pedals has been completed.
 

Removal (Fig. 3):

  • Switch off the ignition
  • Disconnect the electrical plug connection by pressing down the locking device on the connector housing
  • Turn the stop light switch anticlockwise by 45° to the left and pull it out of the mounting hole


Installation (Fig. 4):
the brake pedal must not be operated during the installation process!

  • Before installing, slightly coat the plunger head (tip) of the switch with a suitable grease
  • Carefully insert the new stop light switch into the mounting hole until the plunger head rests against the brake pedal
  • Then using a slight amount of pressure, press the stop light switch in and turn it 45 degrees to the right. The positioning is correct when it is heard clicking into place.
  • Finally reconnect the electrical connection


Depending on the vehicle model, it may be necessary to read out the error memory of the higher-level control unit and to delete any errors stored before the functional test of the stop light switch is carried out.

Perform functional check

  • Switch on the ignition and check the function of the stop light on the rear lamps by depressing the brake pedal several times.
INSTALLATION INSTRUCTIONS

Always observe the installation instructions! (Fig. 5)
Installation should only be carried out by trained, qualified personnel.
Before installation, ensure that the product is suitable for the intended application and that it has the required dimensions, connections, and properties.
Please always observe the relevant installation and removal instructions provided by the vehicle manufacturer!
HELLA accepts no liability for damage caused by improper handling or incorrect installation of the product!


THIS MAY ALSO BE OF INTEREST TO YOU

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly! Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.