Suzuki Grand Vitara - engine overheated / poor heater performance: ventilation of the cooling system

Data sheet
ManufacturerSuzuki
Vehicle modelGrand Vitara
EngineAll diesel engines
Year of manufacture2005 - 2015
SymptomsEngine overheated | Ventilation of the cooling system

Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.

Cooling system not properly vented: engine overheated / poor heater performance

If problems occur with the above-mentioned vehicle after the cooling system has been repaired or opened (high engine temperature, poor heater performance), the cooling system has probably not been bled or vented in accordance with the manufacturer's specifications. In order to do this, please proceed as follows:

  • allow the engine and coolant to cool down!
  • Slowly unscrew and remove cap of the coolant expansion tank (Fig. 1). Caution, system under pressure! (Fig. 2)
  • Loosen the bleed screw from the thermostat unit, which is located on the back of the engine.
  • Fill the coolant tank with coolant (water-antifreeze mix) until it escapes at the bleed screw (Fig. 3)
  • Tighten the bleed screw
  • Fill the expansion tank to "MAX"
  • Replace cap of the expansion tank and tighten it
  • Increase engine speed to 1500 rpm until the upper coolant hose becomes hot
  • Accelerate the engine 4 times to 3500 rpm and then let it run for 20 minutes at 2000 rpm
  • Accelerate the engine a further 4 times to 3500 rpm
  • Switch off the engine and let it cool down
  • Check coolant level and, if necessary, top up coolant when the engine has cooled down


In some cases it is necessary to repeat the whole process.

IMPORTANT

When using coolant, observe the vehicle manufacturer's specifications!


This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.
Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly! Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.