Peugeot 206 - Engine malfunction indicator light is on | HELLA


206 1.6 HDI

Model year from 2005–2007

Engine code DV6TED4 (9HZ)

Engine malfunction indicator light is on

If a customer complains about the above error, this could be caused by a defective plug contact on the air flow sensor. The customer may also complain that the engine goes into limp home mode and that it has no power. Furthermore, various error codes can be displayed in connection with the air flow sensor. In this case, the wiring harness with plug must be installed using a repair kit with OE article number 6569Q9.


The wiring harness in the repair kit has different coloured cables than the cable set installed at the factory. Make sure that you connect the cables correctly during assembly.

Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only. Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.