Opel Forskellige modeller - Utilstrækkelig motoreffekt | HELLA
OpelFlere modellerMotor: Z16XEPUtilstrækkelig motoreffektMotorkontrollampen lyser periodiskHvis ovennævnte fejl konstateres sammen med de følgende fejlkoder, kan årsagen være tilstoppede/blokerede EGR-kanaler (udstødningsrecirkulationskanaler). Fejlkoder:P0171 For mager blandingP0300 Fejltænding på flere cylindreP0301 / P0302 / P0303 / P0304 Fejltænding på cylinder 1/2/3/4P1300 Brændstoftank tom For at udelukke en fejl på EGR-ventilen (udstødningsrecirkulationsventilen) og andre fejlkilder skal periferien for EGR-systemet først kontrolleres. Hvis der ikke konstateres fejl her, gås der frem på følgende måde:Udlæs fejlhukommelsen, og slet evt. fejlkoderDemonter indsugningsmanifolden iht. fabrikantens anvisningerRens EGR-kanalerne i indsugningsrøret med passende værktøjMonter indsugningsmanifolden iht. fabrikantens anvisningerUdlæs fejlhukommelsen, og slet evt. fejlkoder Derefter skal bilen prøvekøres, og fejlhukommelsen skal udlæses påny.
Various Models
Engine : Z16XEP
Insufficient engine power
Engine warning light comes on sporadically
If the error described above occurs in conjunction with the following list of fault codes, a possible cause is clogged/blocked EGR channels (exhaust gas recirculation channel).
Fault codes:
- P0171 Mixture too lean
- P0300 Misfire on multiple cylinders identified
- P0301 / P0302 / P0303 / P0304
Misfire identified on cylinders 1/2/3/4
- P1300 Fuel tank empty
In order to exclude a defect with the EGR valve (exhaust gas recirculation valve) and also to exclude any other causes of the fault, a check should first of all be run on the periphery of the EGR system.
If no errors are found here, proceed as follows:
- Read out error memory and delete all existing fault codes
- Dismantle intake manifold as per manufacturer's specifications
- Clean the EGR channels in the intake manifold with the appropriate tools
- Fit intake manifold as per manufacturer's specifications
- Read out error memory and, if necessary, delete all existing fault codes
Finally a test drive should be carried out and the error memory read once again.