Opel Antara - Starter motor continues to run after engine start

In the above-mentioned vehicle type, it may be possible that the starter does not switch off after having started the vehicle. A possible cause may be a software deviation in the engine control unit, which continuously actuates the starter.

The problem has been identified by the vehicle manufacturer and eliminated as part of a service campaign involving changing the control unit software. However, it cannot be ruled out that individual vehicles have not yet been updated. If vehicles with the described symptom are brought to the workshop, check whether the update has already been carried out. If necessary, contact the vehicle manufacturer or a workshop authorised by the said manufacturer.

For instance, use Hella Gutmann macsRemote Services or a mega macs series PassThru-capable diagnostic unit to update the software. For this purpose, registered access to the vehicle manufacturer's online portal is required. If you do not have the appropriate equipment, we recommend to commission an authorised specialist workshop.

Once the cause of the fault has been eliminated, delete the fault memory and then go for a test drive.

Reprinting, distribution, reproduction, exploitation in any form whatsoever or disclosure of the contents of this document, even in part, is prohibited unless our express permission has been obtained in writing beforehand and the source is stated. The schematic illustrations, pictures and descriptions are provided for explanatory purposes and are only intended as a visual supplement to the document text, so they cannot be used as the basis for installation or assembly work. All rights reserved.