48 V vehicle electrical system – additional voltage level

Key facts at a glance

  • Additional voltage level: the 48 V vehicle electrical system complements the conventional 12 V vehicle electrical system and enables elements including recuperation, electric drive boosts, enhanced start/stop as well as coasting functions.
  • Key components: the 48 V battery stores electrical energy, the 48 V starter alternator operates as either an alternator or a motor and the DC/DC converter enables energy transfers between the 48 V and 12 V vehicle electrical systems.
  • Recuperation and boost: during deceleration, the starter-generator recovers electrical energy and stores it in the 48 V battery. When the vehicle accelerates, this energy can be used to boost the internal combustion engine.
  • Systematic diagnostics: troubleshooting begins with a visual inspection of components, cables as well as plug connections and is supplemented by checking the fault memory and assessing relevant parameters and operating states.
  • Observe legal requirements: operational and safety strategies may affect diagnostics; following repairs or component replacements, adaptations may be necessary and relevant system functions must be checked once the work is complete.

Important safety information

The following technical information and practical tips have been compiled by HELLA to provide professional support to automotive workshops in their day-to-day operations. The information provided on this website is intended for suitably qualified personnel only.

1. Basics

Basics of the 48 V vehicle electrical system

The 48 V vehicle electrical system complements the conventional 12 V vehicle electrical system in compatible vehicles. It boosts the internal combustion engine in certain driving situations, enables energy recuperation during deceleration and powers high-performance electrical components.

If faults occur in the 48 V system, functions, such as recuperation, the automatic start/stop system or the electric boost for the internal combustion engine may be restricted. The following article sets out the technical principles of the 48 V vehicle electrical system and explains its design, how it works and the interaction between its components.

2. Vehicle electrical system

Interaction between 48 V and 12 V vehicle electrical systems

In vehicles with a 48 V vehicle electrical system, a 12 V and a 48 V voltage level operate together. The 12 V vehicle electrical system remains an integral part that continues to supply power to numerous electrical and electronic components in the vehicle. The additional 48 V voltage level is there to operate electrical components with higher power requirements.

A key advantage of the higher voltage level results from the relationship between voltage, current and electrical power. If the voltage is increased, the same electrical power can be transmitted at a lower current. The 48 V voltage level therefore provides the right conditions for more powerful electrical functions.

The additional 48 V power supply enables functions including recovering and storing energy when the vehicle is decelerating. The stored energy can then be made available again for electrical functions. Depending on the vehicle's design, the additional voltage level enables, elements including electric boosts for the internal combustion engine, extended start/stop operation or coasting.

By recovering and reusing energy, it is possible to reduce fuel consumption and, consequently, cut CO₂ emissions. The 12 V and 48 V vehicle electrical systems are interconnected by a DC/DC converter. It enables energy to be transferred between the two voltage levels.

3. Design

48 V vehicle electrical system design

The 48 V vehicle electrical system comprises several electrical and electronic components, the layout and design of which vary depending on the vehicle concept. Typical components include the 48 V battery, a 48 V starter-alternator and the DC/DC converter. Depending on the vehicle design, individual component specifications may vary.

Together, these components enable the storage, conversion and distribution of electrical energy within the 48 V system and between the two voltage levels.

48 V battery

The 48 V battery serves as the energy storage unit for the 48 V vehicle electrical system. For example, it absorbs the electrical energy generated during regenerative braking and makes it available again to the 48 V system when required. The stored energy is thus available for elements including providing electrical boosts to the internal combustion engine, or powering other electrical consumers connected to the 48 V vehicle electrical system.

The 48 V battery features built-in battery electronics. This monitors relevant operating parameters, such as cell voltages and temperatures, as well as the battery condition. Depending on the system's configuration, protection and isolating functions have also been integrated into the battery to disconnect it from the 48 V vehicle electrical system under certain operating or fault conditions.

Depending on the system's configuration, the 48 V battery has been integrated into the vehicle's thermal management system to maintain the battery temperature within the specified operating range.

48 V starter-alternator

The 48 V starter-alternator is responsible for different elements depending on the driving situation. In alternator mode, it converts mechanical energy to electrical energy. This is supplied to the 48 V vehicle electrical system and can be stored in the 48 V battery.

Whenever it operates as a motor, the 48 V starter-alternator converts electrical energy to mechanical energy. This enables it to start the internal combustion engine and, depending on the vehicle's design, boost it during acceleration.

DC-DC converters

The DC/DC converter connects the 48 V vehicle electrical system to the 12 V vehicle electrical system. It converts the respective DC voltage to the required voltage level, thereby enabling the exchange of energy between the two vehicle electrical systems.

Depending on the system's configuration and operating states, electrical energy from the 48 V vehicle electrical system is used to supply the 12 V vehicle electrical system. In systems designed accordingly, energy is also transferred in the opposite direction, so that the 48 V battery is charged by the 12 V side.

48 V wiring

The 48 V vehicle electrical system components are connected to one another by appropriately dimensioned cables. Some vehicle manufacturers mark wiring in the 48 V vehicle electrical system violet. This makes it possible to visually distinguish this wiring from that of the conventional 12 V vehicle electrical system. However, the marking may vary depending on the vehicle manufacturer and model. When carrying out work on the 48 V vehicle electrical system, it is therefore essential to follow the vehicle-specific maintenance and repair instructions provided by the relevant vehicle manufacturer.

4. Operating states and energy flow

Operating states and energy flow in the 48 V vehicle electrical system

48 V vehicle electrical system components work together in different operating states, depending on the driving situation and energy demands. In the process, electrical energy is generated, stored or supplied to boost the drive system. Key functions include recuperation and electric boosts for the internal combustion engine. Depending on vehicle design, the 48 V system also enables enhanced start/stop and coasting functions.

Recuperation

Some of the kinetic energy can be recovered when the vehicle decelerates. In this process, the 48 V starter-alternator operates in alternator mode, converting mechanical energy to electrical energy. The electrical energy generated is stored in the 48 V battery and can subsequently be used to power electrical consumers or boost the drive system.

As a result, some of the energy is reused which would largely be converted to heat as part of conventional braking.

Boost

When accelerating, the electrical energy stored in the 48 V battery can be used to boost the internal combustion engine. The 48 V starter-alternator is driven by the engine and converts electrical energy to mechanical energy. The additional torque provided boosts the internal combustion engine in propelling the vehicle.

This reduces the load on the internal combustion engine in certain driving situations and allows the stored electrical energy to be used specifically to boost the drive system.

Start/stop and coasting

Depending on the vehicle's design, the 48 V vehicle electrical system enhances start/stop capabilities. The 48 V starter-alternator enables the internal combustion engine to restart quickly. Consequently, the internal combustion engine is switched off in suitable driving situations and restarted once power is once again required.

During coasting, the internal combustion engine is switched off in suitable driving situations and the vehicle continues to roll without using its drive torque. Once propulsive power is once again required, the 48 V starter-alternator restarts the internal combustion engine.

Thanks to the extended periods during which the internal combustion engine is switched off, start/stop and coasting can help to reduce fuel consumption and, consequently, cut CO₂ emissions.

5. Diagnostics

Diagnostics in the daily workshop routine

Apply systematic troubleshooting in the event of a fault in the 48 V vehicle electrical system. Initially, it is advisable to visually inspect accessible components, wiring and plug connections to check for damage, loose connections or any other abnormalities. Depending on the system configuration, also take into account relevant components' cooling or heat dissipation. Use a suitable diagnostics system for more in-depth troubleshooting. During diagnostics, note vehicle-specific operating and safety strategies of the 48 V vehicle electrical system. Depending on the vehicle's design, simply opening the bonnet may already affect the 48 V vehicle electrical system's operating status. In some systems, the 48 V voltage level is deactivated for safety reasons. Take this into account during diagnostics and, in particular, when assessing measured values and operating states.

Reading out the fault memory

In the event of a system fault, initially read out the fault memory of the control units connected to the 48 V vehicle electrical system using a suitable diagnostics system. Stored fault codes can provide initial indications as to which part of the system is affected by a fault and serve as a starting point for more in-depth troubleshooting.

Given that 48 V vehicle electrical system components are electronically monitored and operate within a shared network with other vehicle systems, consider relevant fault codes in context. Assess the exact meaning of a fault code and the resulting diagnostics steps on the basis of vehicle-specific diagnostics information.

Reading out and assessing parameters

In addition to the fault memory, the diagnostics system can be used to read out the current parameters of relevant control units. They provide important information about the operating status of the 48 V vehicle electrical system. Depending on vehicle and system configuration, different measured values and status information are available. By analysing relevant parameters as a whole, you can understand operating states and further narrow down any abnormalities.

Parameters relevant to diagnosis depend on the specific system and the applicable fault pattern. The values shown must therefore be interpreted while taking into account the operating states and vehicle-specific manufacturer's information.

6. Repair information

Maintenance and repair instructions

Vehicle-specific requirements and the relevant system configuration must be taken into account when carrying out maintenance and repair work on the 48 V vehicle electrical system. Electrical connections and plug connections must be clean, free from corrosion and securely connected. Replace damaged cable, plug or hose connections. Tighten fastening elements to the torque specifications provided by the vehicle manufacturer.

Also take into account respective components' thermal management. Different cooling concepts are applied depending on the component and its design. For water-cooled components, the cooling circuit must only be opened once it has cooled down. Following work on the cooling circuit, fill the cooling system, bleed it and check for leaks in accordance with the vehicle manufacturer's specifications. Ensure adequate heat dissipation in the case of air-cooled components. Do not cover air vents and cooling fins and do not prevent them from operating properly.

Following component replacement, it may be necessary to configure adaptations using a suitable diagnostics system, depending on the vehicle and system configuration. Read out the fault memory and check relevant system functions checked after commissioning. In the case of a 48 V starter-alternator, these include elements such as the alternator, charging and starting functions.

Please always follow the maintenance and repair instructions provided by the relevant vehicle manufacturer.

Note on diagnostics:

the various diagnostics options have been illustrated as examples using the mega macs S20 diagnostics unit. The respective test depth and variety of functions can differ from vehicle manufacturer to vehicle manufacturer and depend on the respective system configuration of the control unit. Schematic illustrations, images and descriptions serve as explanations and cannot be used as a basis for vehicle-specific repairs.

7. FAQ

FAQ – 48 V vehicle electrical system

Why can a fault in the 12 V vehicle electrical system also affect functions of the 48 V vehicle electrical system?

Both voltage levels operate as an interlinked energy system and they are connected to each other by the DC/DC converter. Depending on the system architecture, disruptions to the 12 V power supply may therefore affect control units, communication or the operational readiness of the 48 V system. Also take into account the 12 V vehicle electrical system during diagnostics, even if fault codes initially point to a 48 V component.

Why might recuperation be limited even though there is no fault affecting the 48 V starter-generator?

The recuperation performance depends on the condition of the entire 48 V system. If, for example, the battery is currently unable to absorb much energy as a result of its state of charge, its temperature or a system-related limit, the energy management system may reduce recuperation. Limited recuperation is therefore not automatically an indication of a faulty starter-alternator and must be assessed on the basis of the relevant diagnostics parameters.

Why is it also necessary to check the belt drive if there is a fault affecting the 48 V starter-generator?

In belt-driven 48 V starter-generators, mechanical power is transmitted by the belt drive between the internal combustion engine and the starter-generator. Wear and tear, insufficient belt tension or faults in the tensioning and deflection components can therefore affect starter, alternator or auxiliary functions. Carry out electrical troubleshooting and a visual inspection of mechanical components together in these systems before identifying the starter-generator as the fault cause.

Why is it necessary to take the operating status of the 48 V vehicle electrical system into account during diagnostics?

The 48 V vehicle electrical system is not necessarily active in all vehicle states. Safety and energy management strategies may deactivate individual components or the entire voltage level, depending on the vehicle's condition. In some vehicles, simply opening the bonnet can trigger such a reaction. Measurements are therefore only conclusive if you know the system state required for the test in question and have established it.

Why can several control units simultaneously store fault codes in the 48 V vehicle electrical system?

48 V system components are functionally linked and integrated into the vehicle's energy management system. A common cause, such as a lacking power supply or a communication fault, can therefore generate consequential entries in several control units. During diagnostics, the time the fault occurred, the fault status and the system context are more important than looking at each individual fault code in isolation.

Is a 48 V vehicle electrical system automatically a high-voltage system?

No. A 48 V vehicle electrical system is not automatically a high-voltage system. Nevertheless, observe relevant safety requirements when working on the 48 V vehicle electrical system. The system's design and vehicle-specific maintenance and safety requirements of the relevant vehicle manufacturer are determinant.

How helpful is this article for you?

Not helpful at all
5
4
3
2
1
Very helpful
Success

Wrong Captcha

Wrong Captcha

Error

Something went wrong

Spare Parts Finder
Oe-No. Manual vehicle identification Universal Parts
Top manufacturers
Other manufacturers
Vehicle series Back
Vehicle Back

Enter the OE number in the input field. You will usually find the OE number on the spare part itself or in the vehicle documents.

Spare Parts Finder
Simple vehicle identification Also determine spare parts with OE numbers Detailed product information Find wholesalers near you
dummy
Processing Selected Car
Manufacturer
Vehicle series
Vehicle
Engine output
Engine displacement
Fuel type
Construction year
Engine code

Choose category:
Back
dummy
Teilen Sie
Send via Copy link
URL copied to the clickboard !
Article NUmber
Number
Article Number Was Copied !
Search The Web Mounting Instructions
More Details
Name Value
Less Details

Your Dealer
Autoteile Krammer GmbH
dummy
Lechstraße 1-3
68199 Mannheim
Show Map

Further technical information

Injection nozzle/injection valve
Basic Knowledge
Injection nozzle/injection valve – Function & checks
Find out how to diagnose a defective fuel injector and replace it in the workshop.
Reading Time: 6 minutes
Checking a high-pressure fuel pump
Basic Knowledge
Checking a high-pressure fuel pump
An overview of the structure and function of the high-pressure fuel pump - with information on fault diagnosis.
Reading Time: 8 minutes
Mixture formation
Basic Knowledge
Fuel system: Design and troubleshooting
It can be a challenge for the workshop if a fault is diagnosed at the NOx sensor when troubleshooting an exhaust gas purification system.
Reading Time: 14 minutes
IBS sensor
Basic Knowledge
IBS sensor: Function, faults and diagnostics
This article explains how the IBS sensor works in energy management and how to systematically diagnose typical faults.
Reading Time: 12 minutes
Central locking system
Basic Knowledge
Central locking system: function and troubleshooting
How does a central locking system work and what causes typical faults? Find out which components work together and how to identify electrical and mechanical faults­.
Reading Time: 8 minutes
A vehicle with an active ADAS system recognises pedestrians and e-scooters in urban traffic by means of radar and sensor signals – a good example of autonomous driving and sensor fusion.
Basic Knowledge
ADAS and autonomous driving: an overview for workshops
Everything you need to know about ADAS and autonomous driving: functions, sensor fusion, AI and diagnostic devices – concisely explained for automotive professionals
Reading Time: 14 minutes
Media pump
Basic Knowledge
Media pump - design, function and troubleshooting
Find out more about the function and system integration of the medium pump as well as testing and repair options.
Reading Time: 7 minutes
E-mobility
Basic Knowledge
E-mobility in everyday workshop activities: technology and requirements
Electromobility is changing workshop processes: find out how workshops handle high-voltage systems, new diagnostics procedures and targeted qualifications
Reading Time: 16 minutes
Electric hatchback actuator
Basic Knowledge
Electric hatchback actuator: troubleshooting
Find out how to systematically diagnose and specifically narrow down common faults in the electric hatchback actuator.
Reading Time: 8 minutes
HELLA 77 GHz radar sensors: Design, function and applications
Basic Knowledge
Maintenance and diagnostics of 77 GHz radar sensors
Find out how the HELLA 77 GHz radar sensor supports driver assistance systems and accurately identifies objects in any weather conditions. Discover the design, function and applications in the vehicle.
Reading Time: 7 minutes

This might also interest you

Quick question

Great! Just one more Step

Subscription successful

Head to your inbox and confirm your email address so that you don’t miss our updates!

Get ready for brand new technical videos, car repair advice, trainings, helpful diagnostic tips, marketing campaigns and much more... delivered straight to your inbox every two weeks!