Chevrolet Captiva - Klimaanlægget virker ikke | HELLA
ChevroletCaptivaÅrgang: 2006-2010Med manuelt klimaanlægKlimaanlægget virker ikkeI ovennævnte modeller kan en forkert udførtserviceprogrammering hhv. forkert kodning medføre, at klimakompressoren ikke aktiveres. Signalet til aktivering/deaktivering af klimaanlægget sendestil ledningsnet-styreenheden. Den kommunikerer med motorstyreenheden via CAN-bussen. Relæet for kompressorkoblingen aktiveres via motorstyreenheden. Ved hjælp af en diagnoseenhed er det ikke kun muligt at udlæse fejllageret, men via en aktuatortest kan funktionen af magnetkoblingen også kontrolleres. Desuden kan diagnoseenheden „opdage“, om signalet til aktivering/deaktivering fra kontakten ankommer til styreenheden. Hvis sikringerne og ledningerne er i orden,hvis aktiveringen af magnetkoblingen og kontakten er kontrolleret, og der ikke foreligger fejlkoder i styreenheden, kan problemet evt. afhjælpes ved en ny kodning/serviceprogrammering af styreenheden. Den skal foretages af et autoriseret serviceværksted.Tip:Hvis det foruden dette problem konstateres, at el-bagruden ikke virker, og/eller der foreligger en fejlmeddelelse om regnsensoren (som slet ikke findes i bilen), tyder det på en forkert programmering/kodning.
Captiva
Model year: 2006-2010
With manual air-conditioning system
Air-conditioning system not working
In the vehicles specified above, an incorrect service programming or incorrect coding could cause the air-conditioning compressor to no longer be activated.
The signal of the On / Off switch of the air-conditioning system is forwarded to the vehicle electric system control unit.
This communicates with the engine control unit via CAN Bus. The compressor coupling relay is driven by means of the engine control unit. A diagnostics tool can not only read out the event memory, but can also check the function of the magnetic coupling by means of an actuator test. In addition, the diagnostics tool can "recognize" in what way the activating and deactivating signal of the switch arrives at the control unit.
If the fuses and wiring are OK, the activation circuit of the magnetic coupling and the switch have been checked, and the control unit does not contain any system-relevant error codes, then it may be possible to correct the problem by repeating the coding / service programming of the control unit.
This should be performed by an authorized dealer.
Tip:
if the rear-window heater is not functioning and / or an error entry appears for a rain sensor (that is not even installed) at the same time as the above problem, then this points to incorrect programming / coding.