Toyota Corolla 2.0 Hybrid - Unusually stiff brake pedal

In the above-mentioned vehicle type, it may be possible that the brake pressure is not correctly established when braking during cornering. As a result, the brake pedal may temporarily feel stiff, the braking force is reduced and the braking distance is noticeably longer. This is caused by a software error in the electronic brake control unit, which, under certain conditions, may to incorrect brake pressure control.

The problem has been identified by the vehicle manufacturer and will be rectified as part of a service campaign using a software update. This involves updating the control unit software to the latest version. For instance, use a Hella Gutmann macsRemote Services or a mega-macs series PassThru-capable diagnostic unit to update the software. Furthermore, registered access to the vehicle manufacturer's online portal is required. If the appropriate equipment is not available, please contact an authorised specialist workshop.

It may still be possible that not all vehicles affected worldwide have been dealt with. If you have vehicles with such problems at the workshop, please bear this information in mind and check whether the recall has been completed in your area. For more details on this issue, if applicable, contact the vehicle manufacturer or a workshop authorised by said manufacturer.

Once the cause of the fault has been eliminated, delete the fault memory and then go for a test drive.

Reprinting, distribution, reproduction, exploitation in any form whatsoever or disclosure of the contents of this document, even in part, is prohibited unless our express permission has been obtained in writing beforehand and the source is stated. The schematic illustrations, pictures and descriptions are provided for explanatory purposes and are only intended as a visual supplement to the document text, so they cannot be used as the basis for installation or assembly work. All rights reserved.