Opel Insignia - Poor engine operation, and loss of power | HELLA

Opel

Insignia

Model year: 2009 – 2010

Engine code: A20DT x

Poor engine operation, loss of power, and the engine malfunction indicator lamp lights up

There may be a loss of engine power in the above vehicles, in which case the engine malfunction indicator lamp also lights up.

The following error codes are stored in the engine control module:

· P2282 meaning leak-in of air between butterfly valve and inlet valve

· P2458 meaning diesel particulate filter, regeneration process, malfunction of timeframe

If a visual inspection of the engine compartment shows that the charger intake hose has come loose from the base of the intercooler, the reason for this may be a faulty clamp.

The clamp may not be clamping sufficiently.

To solve the problem, the connection should be cleaned and a screw clamp should be used to fix the hose in place.

The vehicle manufacturer has already addressed the issue.

Screw clamps are being used in production from Vehicle Identification Number: WOLGT8EM1A1109304.

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.