Ford Transit Connect - Interior blower failure | HELLA


Transit Connect

Model year: 2012-2013

Interior blower failure

Vehicle interior water entry

If the interior blower fails in the vehicles mentioned above, water entering into the vehicle interior could be the cause.

The water can enter via the air conditioner/heater unit or the air channels into the vehicle interior and

cause the blower to fail. This is usually caused by a faulty seal on the under side of the interior filter housing.

The following steps should be taken to rectify the problem:

  • Check the blower motor fuse and replace if necessary
  • Check that the blower motor is functioning correctly and replace if necessary
  • Remove the interior filter
  • Remove the interior filter housing, equip it with sealing material and reinstall it
  • Insert interior filter
  • Carry out leak test

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.