Opel Astra-J - Fejlkode C0277 | HELLA
Opel Astra-JÅrgang 2010 - 2011Alle modellerKontrollampen for elektrisk parkeringsbremse lyser, stoplyset blafrerFejlkode C0277 „Kredsløb for bremsepedalsensor“Hvis ovennævnte fejl forekommer, og der samtidig udløses fejlkode C0277 fra Body Control Modul (BCM), kan årsagen være en funktionsfejl i bremsepedalens positionssensor.I så fald skal pedalsensorens placering og kalibrering kontrolleres.Efter af- hhv. påmontering eller udskiftning af bremsepedal-positionssensoren skal BCM kalibreres med et passende diagnoseapparat. Denne procedure tjener til at fastlægge sensorens nulstilling.Procedure ved kalibreringAktiver parkeringsbremsenSæt auomatgearvælgeren i „P“ (hvis monteret)Tilslut en diagnosetester, f.eks Mega Macs 66Udlæs og slet fejlkoderVælg funktionen for grundindstillingen „Indlær bremsepedalposition“Foretag kalibreringBemærkningHvis fejlen fortsat foreligger, skal bremsepedal-positionssensoren udskiftes.Bilfabrikanten har allerede indførtforbedrede sensorer.
Model year 2010-2011
All models
Electric parking brake indicator lamp illuminates, brake light flickers
Error code C0277 "Brake pedal sensor current circuit"
If the error above occurs and error code C0277 is read out of the Body Control Module (BCM) at the same time, the brake pedal position sensor could be a possible cause of the malfunction for this.
In this case, the installation position and the calibration of the pedal sensor must be checked.
After a removal or installation, or renewal of the brake pedal position sensor, a calibration must be carried out in BCM using an appropriate diagnostic unit. This procedure serves for determining the zero position of the sensor.
Calibration procedure
- Actuate the parking brake
- Set automatic transmission to "P" (if available)
- Connect diagnostic tester, e.g., Mega Macs 66
- Read-out and delete the error codes
- Select the function basic setting "Teach brake pedal position"
- Perform calibration
Note
If the defect continues to occur after this, the brake pedal position sensor must be replaced.
The vehicle manufacturer has already used
an improved sensor within the production.