Opel Adam - Stop lamps permanently on | HELLA

Opel

Adam

Model year: 2013 to 2018

Stop lamps permanently on

If the above-mentioned problem is detected, one possible cause may be incorrect adjustment / positioning of the stop-lamp switch.

This can cause the stop lamp to light up permanently without the brake having to be applied.

It is also possible that the error code C0161 is stored in the ABS control unit.

Remedy:

Check functioning of the stop-lamp switch and readjust if necessary. In the event of malfunctioning, replace the stop-lamp switch and position it correctly.

In addition, read the error code memory in the ABS control unit and delete stored errors.



Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only. Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.