${productDescription}
|
|
|
|
|
|
|
|
2026-07-01
Suspended Pedal sensors
Determining speed: HELLA accelerator pedals designed for suspended mounting can be used in a wide variety of vehicles – they can be used for passenger cars, for example sports cars or electric vehicles, as well as for numerous commercial or special vehicles, to robust applications in agricultural and construction vehicles.
The measuring principle of the accelerator pedal sensors operates without magnets and is therefore rare-earth-free. It is powered by FORVIA HELLA’s high-precision CIPOS inductive sensor technology - proven over decades in more than one billion applications worldwide! The signal output can be provided in classic analog or digital form.
The housing and pedal plate of the suspended pedal sensors are made of recyclable, fiberglass-reinforced plastic. Force transmission and safe resetting are provided by two independent springs. The CIPOS sensor provides the electrical output signal For this purpose, a sheet metal cursor is routed from the pedal arm contactless above sensor paths on the measuring board. On the measuring board, two galvanically isolated sensors each generate an output signal. The signal type depends on the measuring board. Individual characteristic curves can also be programmed to meet customer-specific requirements.
Determining speed: HELLA accelerator pedals designed for suspended mounting can be used in a wide variety of vehicles – they can be used for passenger cars, for example sports cars or electric vehicles, as well as for numerous commercial or special vehicles, to robust applications in agricultural and construction vehicles.
The measuring principle of the accelerator pedal sensors operates without magnets and is therefore rare-earth-free. It is powered by FORVIA HELLA’s high-precision CIPOS inductive sensor technology - proven over decades in more than one billion applications worldwide! The signal output can be provided in classic analog or digital form.
The housing and pedal plate of the suspended pedal sensors are made of recyclable, fiberglass-reinforced plastic. Force transmission and safe resetting are provided by two independent springs. The CIPOS sensor provides the electrical output signal For this purpose, a sheet metal cursor is routed from the pedal arm contactless above sensor paths on the measuring board. On the measuring board, two galvanically isolated sensors each generate an output signal. The signal type depends on the measuring board. Individual characteristic curves can also be programmed to meet customer-specific requirements.
Pedal sensor for pendant mounting.
Technical drawing of the pedal sensor for pendant mounting.
Pedal sensors
CIPOS technology
Technical Data
| Operating voltage | 5 V ± 10% |
| Initial force | 20 N |
| Final force | 35 N |
| Actuation angle | 13° |
| Output signal | 2 x analog ratiometric, 2nd channel half pitch |
| Idling voltage | 15% / 7.5% |
| Full throttle voltage | 88% / 44% |
| Operating temperature | -40 °C to +80 °C |
| Protection class | IP 5K4 |
Program Overview
| Variant | Part number | PU |
|---|---|---|
| Pendant pedal sensor | 6PV 009 898-007 | 33 |
| Off-Highway pedal | on request | 1 |
| Optional accessory: Pedal plate orange for pendant pedal | on request | 1 |
| Kickdown element: Short stroke (force level 131 N – 151 N) | on request | - |
| Kickdown element: Long stroke (force level 32 N – 76 N) | on request | - |