Control units for current monitoring

Electrics and ElectronicsLighting & body electronics

Well protected against failure: HELLA control units for current monitoring are used for custom functional monitoring of LED headlamps and beacons. They determine the average energy requirements based on a continuous current measurement.

 

The control unit is connected upstream of the LED headlamp and continuously measures the current consumption when switched on.

 

HELLA offers two 12 V and one 24 V control unit variants, which indicate the correct function of the headlamp through a high gauge at the status output when a minimum current value is exceeded, and headlamp defects by a low gauge when the current falls below the minimum value. Monitoring takes place exclusively when the ignition and headlamps are switched on.

Product Advantages

  • For custom functional monitoring of LED headlamps and beacons
  • Failure indication via status output
  • For vehicles with 12 V or 24 V vehicle electrical system voltage
  • Connector pattern compatible with ISO 7588-2

Technical Data

Operating temperature -40 °C to +85 °C

Protection class

IP 5KX

Connection

Flat connector DIN 46244 A6, 3 x 0.8 mm

Program Overview

Variant Load current threshold Part number Packaging unit
12 V 500 mA 5DS 011 630-001 1
24 V 350 mA 5DS 011 630-211 1
24 V 500 mA 5DS 011 630-011 1

Downloads