${productDescription}
|
|
|
|
|
|
|
|
2025-10-03
Power Beam S-series I
Universal halogen replacement at the best value for money: With its universal and slim design, the FORVIA HELLA Power Beam S-series can replace existing halogen units like for like. Their higher efficiency and longer service life are convincing traits. Depending on the variant, the Power Beam S-series achieves a light output of 1,000 lumens or 1,850 lumens.
Thanks to the automatic dimming from a temperature of +50 °C and the new, efficient cooling fins, the work lamps do not overheat. The housing and cover lens of the Power Beam S-series are made of special, very light and corrosion-resistant plastics. Thanks to the weight reduction and higher energy efficiency, the S-series also contributes towards reducing CO2.
The Power Beam S-series is dust-proof, waterproof and protected against polarity reversal. The ECE-approved work lamps have approval for transport of hazardous goods and meet the highest EMC requirements. Upright or pendant surface mounting is possible.
Universal halogen replacement at the best value for money: With its universal and slim design, the FORVIA HELLA Power Beam S-series can replace existing halogen units like for like. Their higher efficiency and longer service life are convincing traits. Depending on the variant, the Power Beam S-series achieves a light output of 1,000 lumens or 1,850 lumens.
Thanks to the automatic dimming from a temperature of +50 °C and the new, efficient cooling fins, the work lamps do not overheat. The housing and cover lens of the Power Beam S-series are made of special, very light and corrosion-resistant plastics. Thanks to the weight reduction and higher energy efficiency, the S-series also contributes towards reducing CO2.
The Power Beam S-series is dust-proof, waterproof and protected against polarity reversal. The ECE-approved work lamps have approval for transport of hazardous goods and meet the highest EMC requirements. Upright or pendant surface mounting is possible.
Photo of the Power Beam S-series variant I with long-range illumination, diffuse flood illumination and close-range illumination.
Dimensional sketch of the Power Beam S-series standard variants.
This light distribution shows the long-range illumination of the Power Beam S-series variant I.
This light distribution shows the close-range illumination of the Power Beam S-series variant I.
This light distribution shows the diffuse flood illumination of the Power Beam S-series variant I.
Video of the S-series work lamps
Technical Data
| I | |
|---|---|
| Operating voltage range | Multi-voltage (9-32 V) |
| Rated voltage | 12 V and 24 V |
| Current consumption | 12 V: ø 0.85 A* 24 V: ø 0.41 A** |
| Power consumption |
12 V: ø 11.2 W* |
| Light output (warm) | ø1,150 lm |
| Light source | LED |
| Colour temperature | 6,500 K*** |
| Material | Housing: heat-conductive plastic Cover lens: plastic Bracket: plastic (Black Edition) |
| Weight | 393 g |
| Temperature range | -40 °C to +85 °C (overheating protection) |
| Protection class | IP 6K7, IP 6K9K |
| Approved | ECE-R10, ADR / GGVSEB |
| Compliant | RCM, CISPR 25 Class 5 (12V) and Class 4 (24V) |
| Protection | Polarity reversal protection, overvoltage protection |
| Mounting | Upright and pendant mounting |
| Connection | DEUTSCH DT connector, 2-pin |
* Warm measured at 13.2 V after 30 minutes of operation.
** Warm measured at 28 V after 30 minutes of operation.
*** 5,000 K variants available on request.
Program Overview
| Variant | Illumination | Part number |
|---|---|---|
| I - Standard | Close-range illumination | 1GA 996 588-001 |
| Long-range illumination | 1GA 996 588-011 | |
| Diffuse flood illumination | 1GA 996 588-041 |