LED licence plate lamp 012 271

Optimally illuminated: The HELLA LED licence plate lamp for surface mounting ensures optimum illumination and recognizability of the licence plate thanks to the two powerful, bright white, high-performance LEDs and the special Fresnel optics. It is suitable for universal use in a variety of vehicle types.


In addition to the high light output, the LED technology impresses with its low energy consumption and, in accordance with the guiding principle of “fit and forget,” is particularly durable at approx. 40,000 operating hours.


Thanks to multi-voltage technology, the EMC-tested LED licence plate lamp can be used in both 12 V and 24 V environments. The lamp is ECE-approved and also meets the strict requirements for dangerous goods transport in accordance with GGVS/ADR.


Various connector options, from 6.3 mm flat receptacles to EasyConn connectors and the AMP-SUPERSEAL connector, enable connection in all common vehicle systems. Mounting is done as a surface attachment via screw mounting.

Product Advantages

  • Multi-voltage design for flexible use in 12 V and 24 V systems
  • High functional reliability through LED
  • Highly efficient electronic set-up – minimum energy consumption
  • ADR-certified for dangerous goods transport

Technical Data

Operating voltage Multi-voltage (9-32 V)
Current consumption ~ 0.02 A
Power consumption 0.3 W (12 V), 0.5 W (24 V)
Light function Licence plate light
Light source LED
Temperature range -40 °C to +85 °C
Protection class IP 5K9K
Type approval ECE E24 0032
EMC protection E1 10R-04 047294
Specification HELLA Standard 67101, Class 5.1
Mounting Surface-mounted variant, screw fixing

Program Overview

Plug connection Part number
6.3 mm flat receptacles with 2,000 mm cable 2KA 012 271-031
Quick Link connector with 500 mm cable 2KA 012 271-041
EasyConn connector (straight) with 500 mm cable 2KA 012 271-051
EasyConn connector (2-pin 90°) with 1,300 mm cable 2KA 012 271-071
AMP-SUPERSEAL connector (over-molded) with 2,000 mm cable 2KA 012 271-081