Module 90 S-series

Extended lifetime, increased efficiency: The Module 90 S-series from FORVIA HELLA consists of LED work lamps with high light output in a practical design. They provide homogeneous illumination with a light colour similar to daylight. Thanks to their compact dimensions, the flush mounting work lamps of the S-series can be used universally. Existing halogen lamps can be quickly and easily converted to the powerful LED technology.

 

The innovative LED technology offers an excellent price-performance ratio. The work lamps of the Module 90 S-series convince with 1,850 lumens (vasriant II) and as premium LED work lamps with a high light output of 4,000 lumens (variant IV). The high efficiency compared to halogen devices is achieved through the excellent lumen/watt performance. A long lifetime can be achieved thanks to the cooling fin design with better heat dissipation. The integrated thermal management protects the lamp with automatic dimming against the threat of overheating between +50 °C and +85 °C.

 

The housings and cover lenses of the 1,850 lumen variant II are made of special plastic, which ensures weight reduction and high corrosion resistance. The powerful 4,000 lumen variant IV is equipped with a high-quality die-cast aluminium housing – corrosion protection is achieved through the surface coatings. The work lamps meet the highest EMC requirements.

Product Advantages

  • Halogen replacement series (1,850 lm) and premium LED work lamp series (4,000 lm)
  • Longer life and higher efficiency compared to halogen
  • Low weight and high corrosion resistance thanks to high-quality materials and coatings

Video of the S-series work lamps

Technical Data

  II IV
Operating voltage range Multi-voltage (9-32 V)
Rated voltage 12 V and 24 V
Current consumption 12 V: ø 1.29 A*
24 V: ø 0.61 A**
12 V: ø 2.95 A*
24 V: ø 1.34 A**
Power consumption

12 V: ø 17 W*
24 V: ø 17 W**

12 V: ø 39 W*
24 V: ø 37.5 W**
Light output (warm) ø1.850 lm ø 4.000 lm
Light source LED
Colour temperature 6,500 K***
Material

Housing: plastic
Cover lens: plastic

Housing: die-cast aluminium
Cover lens: plastic

Weight 256 g 575 g
Temperature range -40 °C to +85 °C (overheating protection)
Protection class IP 6K7, IP 6K9K
Approved ECE-R10
Compliant

RCM, CISPR 25 Class 5 

Protection Polarity reversal protection, overvoltage protection 
Mounting Flush mounting
Connection DEUTSCH DT connector, 2-pin
Manufactured in Austria

 

 

* Warm measured at 13.2 V after 30 minutes of operation.
** Warm measured at 28 V after 30 minutes of operation.
*** 5,000 K variants available on request.

Program Overview

Variant Illumination Part number Packaging unit
II Close-range illumination 1G0 996 463-007 40
Long-range illumination 1G0 996 463-017 40
IV Close-range illumination 1G0 996 463-407 40
Long-range illumination 1G0 996 463-417 40

 

 

Additional Equipment

Description Part number
Adjusting screw group:
3 x ball screw
3 x thread fitting
3 x joint piece
9NS 254 242-091
2,000 mm cable with DEUTSCH DT connector 8KB 990 299-011

Downloads