${productDescription}
|
|
|
|
|
|
|
|
2025-09-19
Pedal sensors
Determining speed: HELLA accelerator pedal sensors are suitable for a wide range of applications in different vehicle sectors. Whether for upright or pendant surface mounting: The accelerator pedal sensors can be used for passenger cars, for example sports cars or electric vehicles, as well as for numerous commercial or special vehicles.
The measuring principle of the accelerator pedal sensors operates without magnets and is therefore rare-earth-free. It is powered by FORVIA HELLA’s high-precision CIPOS® inductive sensor technology - proven over decades in more than one billion applications worldwide! The signal output can be provided in classic analog or digital form.
The housing and pedal plate of both the upright and pendant HELLA accelerator pedal sensors are made of recyclable, fiberglass-reinforced plastic. Force transmission and safe resetting are provided by two independent springs. The CIPOS® sensor provides the electrical output signal. In both pedal variants, a cursor sheet is guided from the pedal plate with deflection rod (upright) or the pedal arm (pendant) over sensor conductor tracks of the measuring board. On the measuring board, two galvanically isolated sensors each generate an output signal. The signal type depends on the measuring board. Individual characteristic curves can also be programmed to meet customer-specific requirements.
Determining speed: HELLA accelerator pedal sensors are suitable for a wide range of applications in different vehicle sectors. Whether for upright or pendant surface mounting: The accelerator pedal sensors can be used for passenger cars, for example sports cars or electric vehicles, as well as for numerous commercial or special vehicles.
The measuring principle of the accelerator pedal sensors operates without magnets and is therefore rare-earth-free. It is powered by FORVIA HELLA’s high-precision CIPOS® inductive sensor technology - proven over decades in more than one billion applications worldwide! The signal output can be provided in classic analog or digital form.
The housing and pedal plate of both the upright and pendant HELLA accelerator pedal sensors are made of recyclable, fiberglass-reinforced plastic. Force transmission and safe resetting are provided by two independent springs. The CIPOS® sensor provides the electrical output signal. In both pedal variants, a cursor sheet is guided from the pedal plate with deflection rod (upright) or the pedal arm (pendant) over sensor conductor tracks of the measuring board. On the measuring board, two galvanically isolated sensors each generate an output signal. The signal type depends on the measuring board. Individual characteristic curves can also be programmed to meet customer-specific requirements.
Pedal sensor for pendant mounting.
Technical drawing of the pedal sensor for pendant mounting.
Pedal sensor for upright mounting.
Technical drawing of the pedal sensor for upright mounting.
Side view of the pedal sensor for upright mounting.
Pedal sensors
CIPOS® technology
Technical Data
| Pendant pedal sensors |
Upright pedal sensors |
|
|
Operating voltage |
5 V ± 10% |
5 V ± 6% |
|
Initial force |
20 N |
15.5 N |
| Final force | 35 N | 31 N |
| Actuation angle |
13° |
15° |
| Output signal |
2 x analog ratiometric, 2nd channel half pitch |
2 x analog ratiometric, 2nd channel half pitch |
| Idling voltage |
15% / 7.5% |
16% / 8% |
| Full throttle voltage | 88% / 44% | 79% / 39% |
| Operating temperature |
-40 °C to +80 °C |
-40 °C to +80 °C |
| Protection class | IP 5K4 |
IP 5K4 |
Program Overview
| Variant | Part number | PU |
|---|---|---|
| Pendant pedal sensor | 6PV 009 898-007 | 33 |
| Upright pedal sensor |
6PV 312 093-017 |
16 |
| Off-Highway pedal | on request | 1 |
| Optional accessory: Pedal plate orange for pendant pedal | on request | 1 |