${productDescription}
|
|
|
|
|
|
|
|
2024-01-04
RokLUME 280N SMART
Intelligent work lamp with smart features: The intelligent HELLA RokLUME 280N SMART work lamp allows individual light settings. This enables the light to be adjusted to different weather or driving conditions to provide the right illumination for every application.
The smart features of the lamp include changing the colour temperature from warm to cold white and the light colour to green or amber, depending on the variant. Among other things, this can ensure the highest possible visibility in dust, snow or fog. With the help of the dimming function, the brightness level can be adjusted to the current lighting conditions, which also reduces the power consumption. Additionally, the intelligent work lamp is available in six illumination variants.
Conventional work lamps can be replaced with the intelligent work lamp in no time at all. The control unit (gateway) uses powerline communication (PLC) to send interference-free signals to the lamps via the existing cables. The RokLUME 280N SMART is controlled via the HELLA control panel or via the Human Machine Interface (HMI) in the vehicle.
Intelligent work lamp with smart features: The intelligent HELLA RokLUME 280N SMART work lamp allows individual light settings. This enables the light to be adjusted to different weather or driving conditions to provide the right illumination for every application.
The smart features of the lamp include changing the colour temperature from warm to cold white and the light colour to green or amber, depending on the variant. Among other things, this can ensure the highest possible visibility in dust, snow or fog. With the help of the dimming function, the brightness level can be adjusted to the current lighting conditions, which also reduces the power consumption. Additionally, the intelligent work lamp is available in six illumination variants.
Conventional work lamps can be replaced with the intelligent work lamp in no time at all. The control unit (gateway) uses powerline communication (PLC) to send interference-free signals to the lamps via the existing cables. The RokLUME 280N SMART is controlled via the HELLA control panel or via the Human Machine Interface (HMI) in the vehicle.
The intelligent work lamp RokLUME 280N SMART with long-range illumination.
The ZEROGLARE illumination variant of the work lamp RokLUME 280N SMART.
The Gateway Base is the control unit for interference-free communication with the headlamps.
In addition to controlling the intelligent work lamps, the Gateway Prime also enables a cornering light function.
With the HELLA control panel, the colour temperature, the brightness level and, depending on the variant, the light colour of the work lamps can be adjusted.
Dimensional sketch of the RokLUME 280N SMART work lamp from the front and side.
Dimensional sketch of the RokLUME 280N SMART work lamp from the side with horizontal mounting.
Dimensional sketch of the Gateway Base and Prime.
Dimensional sketch of the HELLA control panel.
The intelligent work lamp RokLUME 280N SMART can be mounted upright, horizontally and pendant thanks to the centred heavy duty bracket.
Video of the work lamp RokLUME 280N SMART
Installation video of the work lamp RokLUME 280N SMART
Technical Data
| Operating voltage |
Single-voltage (18 – 32 V) |
| Rated voltage | 24 V |
| Current consumption | Ø 2.35 A (24 V) |
| Power consumption | Ø 56 W max. 57 W |
| Light output | Up to 3,500 lm |
| Light source | LED |
| Colour temperature | 3,000 K to 6,800 K |
| Material | Housing: die-cast aluminium Cover lens: hard-coated plastic |
| Weight | 1,597 g / 1,584 g (ZEROGLARE) |
| Temperature range | - 40 °C to + 90 °C (overheat protected) |
| Protection class | Work lamp: IP 6K8, IP 6K9K Gateway Base/ Prime: IP 6K8, IP 6K9K HELLA control panel: IP 6K7 |
| Type approval | UKCA, ECE-R10, RCM |
| EMC protection | CISPR 25 |
| Salt spray resistance | 1,200 h as per DIN EN ISO 9227 |
| Mounting | Upright, pendant and horizontal |
| Connection | DEUTSCH DT 2 pin connector DEUTSCH DT 2 pin counterpart included |
| Manufactured in | Austria |
Program Overview
| Variant | Illumination | Part number |
| 3,000 K to 6,800 K White to green |
Close-range illumination | 1GA 995 707-401 |
| Long-range illumination | 1GA 995 707-411 | |
| ZEROGLARE illumination | 1GA 995 707-421 | |
| Pencil beam illumination | 1GA 995 707-431 | |
| Diffuse flood illumination | 1GA 995 707-441 | |
| Tunnel flood illumination | 1GA 995 707-451 | |
| 3,000 K to 6,800 K White to amber |
Close-range illumination | 1GA 995 707-551 |
| Long-range illumination | 1GA 995 707-561 | |
| ZEROGLARE illumination | 1GA 995 707-571 | |
| Pencil beam illumination | 1GA 995 707-581 | |
| Diffuse flood illumination | 1GA 995 707-591 | |
| Tunnel flood illumination | 1GA 995 707-601 | |
| 3,000 K to 6,800 K | Close-range illumination | 1GA 995 707-461 |
| Long-range illumination | 1GA 995 707-471 | |
| ZEROGLARE illumination | 1GA 995 707-481 | |
| Pencil beam illumination | 1GA 995 707-491 | |
| Diffuse flood illumination | 1GA 995 707-501 | |
| Tunnel flood illumination | 1GA 995 707-511 |
Set
| Variant | Illumination | Description | Part number |
| 3,000 K to 6,800 K White to green |
Close-range illumination | 4 x work lamps, Gateway Base, HELLA control panel, wiring harness | 1GA 995 707-801 |
| ZEROGLARE illumination | 4 x work lamps, Gateway Prime, HELLA control panel, wiring harness | 1GA 995 707-811 |
Individual parts for the set-up
| Description | Additional information | Part number |
| Gateway Base | Control of the intelligent work lamps | 9SX 333 522-001 |
| Gateway Prime | Control of the intelligent work lamps, cornering light function possible | 9SX 333 523-001 |
| HELLA control panel | Setting the colour temperature, the light colour (if applicable), the brightness level and the memory function | 9SX 333 525-001 |
| Wiring harness | Connection from the HELLA control panel to the gateway and from the gateway to the fuse box* | 8KB 333 557-001 |
* The wiring harness from the gateway to the fuse box must be shortened to the correct length. The wiring harness must not be laid in loops!