|
|
|
|
|
|
|
|
An ultra efficient update: The cutting-edge FORVIA HELLA Ultra Beam S-series redefines efficiency standards. With a power consumption of just 36.5 W (24 V) or 38 W (12 V), these work lamps deliver an impressive 4,800 lumens of light output – equivalent to more than 126 lumens per watt. As a result, the new Ultra Beam S Series significantly outperforms the previous generation while helping to reduce fuel consumption, operating costs and CO₂ emissions.
Manufactured on an automated production line, the S-series guarantees consistent high quality. Crafted with eight high-performance LEDs, a colour temperature of 6,500 Kelvin and a special reflector, it delivers a uniform illumination of the work area that is similar to daylight.
The Ultra Beam S series is equipped with innovative electronics, featuring overvoltage protection, a thermal sensor, as well as a soft start that minimises the vehicle electrical system strain when multiple lamps are switched on. The die-cast aluminium housing with its massive cooling fins ensures efficient heat dissipation, guaranteeing an extended service life. Robust, dustproof and waterproof, the LED work lamps can endure even harsh conditions.
The Ultra Beam S-series is also available as a Black Edition, featuring a stylish black design that integrates seamlessly into modern vehicle aesthetics.
An ultra efficient update: The cutting-edge FORVIA HELLA Ultra Beam S-series redefines efficiency standards. With a power consumption of just 36.5 W (24 V) or 38 W (12 V), these work lamps deliver an impressive 4,800 lumens of light output – equivalent to more than 126 lumens per watt. As a result, the new Ultra Beam S Series significantly outperforms the previous generation while helping to reduce fuel consumption, operating costs and CO₂ emissions.
Manufactured on an automated production line, the S-series guarantees consistent high quality. Crafted with eight high-performance LEDs, a colour temperature of 6,500 Kelvin and a special reflector, it delivers a uniform illumination of the work area that is similar to daylight.
The Ultra Beam S series is equipped with innovative electronics, featuring overvoltage protection, a thermal sensor, as well as a soft start that minimises the vehicle electrical system strain when multiple lamps are switched on. The die-cast aluminium housing with its massive cooling fins ensures efficient heat dissipation, guaranteeing an extended service life. Robust, dustproof and waterproof, the LED work lamps can endure even harsh conditions.
The Ultra Beam S-series is also available as a Black Edition, featuring a stylish black design that integrates seamlessly into modern vehicle aesthetics.
| Operating voltage | Multi-voltage (9 – 32 V) |
| Rated voltage | 12 V and 24 V |
| Current consumption | 12 V: Ø 2.87 A* 24 V: Ø 1.3 A** |
| Power consumption | 12 V: Ø 38 W* 24 V: Ø 36.5 W** |
| Light output | Ø 4,800 lm |
| Light source | LED |
| Colour temperature | 6,500K*** |
| Material | Housing: die-cast aluminium Cover lens: plastic Bracket: plastic |
| Weight | 895 g |
| Temperature range | -40 °C to +85 °C (overheating protection) |
| Protection class | IP 6K9K, IP 6K8 |
| Approved | ECE-R10, ADR/GGVSEB |
| Compliant | RCM, CISPR 25 Class 5 |
| Salt spray resistance | 720 h as per DIN EN ISO 9227 |
| Mounting | Upright and pendant mounting |
| Connection | DEUTSCH DT connector, 2-pin |
* Warm measured at 13.2 V after 30 minutes of operation.
** Warm measured at 28 V after 30 minutes of operation.
*** 5,000 K variants available on request.
| Variant | Illumination | Part number |
|---|---|---|
| Standard | Close-range illumination | 1GA 995 706-001 |
| Long-range illumination | 1GA 995 706-011 | |
| Black Edition | Close-range illumination | 1GA 995 706-401 |
| Long-range illumination | 1GA 995 706-411 |
| Description | Part number |
|---|---|
| 2,000 mm cable with DEUTSCH DT connector | 8KB 990 299-071 |
| Rubber cap | 9GH 990 316-041 |
|
|
|
|
|
|
|
|