LED licence plate lamp 010 278

Put your licence plate in the right light: The compact HELLA LED licence plate lamp for flush or surface mounting, illuminates your vehicle licence plate in an eye-catching way. This makes it very visible to all road users, even from further away. The combination of four power LEDs and HELLA precision optics provide bright, uniform illumination. The energy-efficient and high-intensity LED technology achieves a better light yield than with conventional bulbs, while also consuming significantly less energy. The flush mounting variants impress with their particularly flat design, which allows for easy installation above the licence plate. In this case, two licence plate lamps are required for uniform illumination. The surface-mounted variants have a classic housing. In this case, due to the optimal light output, one side mounted lamp is sufficient. The HELLA LED licence plate lamp is resistant to vibrations, dustproof, waterproof, and high-pressure jet cleaner resistant. Old incandescent bulb variants can be easily replaced with the modern LED variants.

Product Advantages

  • LED licence plate lamps as flush mounting or surface mounting variant
  • Long lifetime with low current consumption
  • High dust and water tightness

Technical Data

Rated voltage 12 V or 24 V
Current consumption 0.08 A (12 V), 0.04 A (24 V)
Power consumption 1 W
Light function Licence plate light
Light source LED
Temperature range -40 °C to +50 °C
Protection class IP 6K9K
Type approval 520 x 120 plate: ECE E1 2609
280 x 200 and 340 x 240 plate: ECE E1 2911
Specification HELLA Standard 67101, Class 7.2 Agro Plus
Mounting Flush or surface mounting
Connection 6.3 mm flat connector

Program Overview

Licence plate size Mounting Voltage Specification Part number
520 x 120 mm Flush mounting* 12 V With bezel and 6.3 x 0.8 mm flat receptacles 2KA 010 278-311
520 x 120 mm Flush mounting* 24 V With bezel and 6.3 x 0.8 mm flat receptacles 2KA 010 278-011
520 x 120 mm Surface mounting**** 12 V With housing and 6.3 x 0.8 mm flat receptacles 2KA 010 278-321
520 x 120 mm Surface mounting** 24 V With housing and 6.3 x 0.8 mm flat receptacles 2KA 010 278-021
520 x 120 mm Surface mounting** 24 V Housing potted, with 2,000 mm cable and 6.3 x 0.8 mm flat receptacles 2KA 010 278-031
340 x 240 mm and 280 x 200 mm Flush mounting* 12 V With bezel and 6.3 x 0.8 mm flat receptacles 2KA 010 278-411
340 x 240 mm and 280 x 200 mm Flush mounting* 24 V With bezel and 6.3 x 0.8 mm flat receptacles 2KA 010 278-111
340 x 240 mm and 280 x 200 mm Surface mounting** 12 V With housing and 6.3 x 0.8 mm flat receptacles 2KA 010 278-421
340 x 240 mm and 280 x 200 mm Surface mounting** 24 V With housing and 6.3 x 0.8 mm flat receptacles 2KA 010 278-121

 

* 2 lamps required above licence plate
** 1 lamp required to right or left of licence plate

Downloads