Throttle valve switch: Function, fault symptoms and testing instructions

The throttle valve switch informs the engine control unit about the throttle valve position so that the mixture and ignition can be adjusted to suit the respective load. This page explains how the throttle valve switch works and how a fault impacts the running of the engine. You will also find practical tips on how to check the throttle valve switch.

Important safety note

The following technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for suitably qualified personnel only.

1. Functional principle

How the throttle switch works

Throttle valve switches determine the throttle valve position. They are mounted directly on the throttle valve shaft. The various switch positions are transmitted to the engine management control unit and assist in the calculation of the required fuel quantity.

The throttle valve switch houses two switches which are actuated using a switching mechanism. The two switches give the engine management control unit information on the engine operating states "idle" and "full load" to ensure the necessary fuel quantity is accurately calculated.

2. Symptoms

Throttle valve switch faulty

A faulty throttle valve switch can cause the following:

  • Engine switches off during idle
  • Engine lurches under full load
3. Cause of failure

Causes of a faulty throttle switch

The causes of a faulty throttle valve switch could be:

  • Mechanical damage (e.g. due to vibrations)
  • Contact fault at the electrical connection (corrosion, humidity)
  • Contact fault at the internal switch contacts (humidity, contamination)
4. Troubleshooting

Checking the throttle valve switch

The following test steps should be considered during troubleshooting:

1

Check the throttle valve switch

Check the throttle valve switch for correct mounting

2

Check the switching mechanism

Check whether the switching mechanism is actuated by the throttle valve shaft (with the engine switched off, move the throttle valve from the idle limit stop to the full-load limit stop and listen to hear whether the switches are actuated)

3

Check the plug connection

Check the plug connection to ensure it is fitted correctly and for any contamination

4

Check the switch contacts using a multimeter Pin assignment

  • Idle switch closed: Measurement between pin 1 and 3. Measured value = >30 MOhm.
  • Idle switch opened: Measurement between pin 1 and 3 (Caution: Slowly open the throttle valve during the measurement until the idle switch opens). Measured value = 0 ohms.
  • Full-load switch opened: Measurement between pin 1 and 2. Measured value = >30 MOhm.
  • Full-load switch closed: Measurement between pin 1 and 2. Measured value = 0 ohms

Cât de util ți se pare acest articol?

Nu este deloc util
5
4
3
2
1
Foarte util
Succes

Captcha incorectă

Captcha incorectă

Eroare

A apărut o eroare

Căutare piese de schimb
Nr. OE Identificarea manuală a vehiculului
Cei mai importanți producători
Alți producători
Seria de vehicule Înapoi
Vehicul Înapoi

Introduceți numărul OE în câmpul de introducere. De obicei, numărul OE se găsește pe piesa de schimb însăși sau în documentele vehiculului.

Căutare piese de schimb
De asemenea, identificați piesele de schimb cu numerele OE Informații detaliate despre produs Găsiți distribuitori en gros în apropierea dumneavoastră
dummy
Processing Selected Car
Poducători
Seria de vehicule
Vehicul
Puterea motorului
Cilindreea motorului
Tipul de combustibil
Anul de construcție
Codul motorului

Alegeți categoria:
Înapoi
dummy
Distribuie
Trimite prin Copiază linkul
Adresa URL a fost copiată în clickboard!
Numărul articolului
Number
Numărul articolului a fost copiat!
Căutare pe internet Instrucțiuni de montare
Mai multe detalii
Denumirea produsului Valoare
Mai puține detalii

Dealerul dumneavoastră
Autoteile Krammer GmbH
dummy
Lechstraße 1-3
68199 Mannheim
Afișează harta