Damage assessment of disc brake pads on commercial vehicles: Identifying the causes, preventing any damage

Brake pads on commercial vehicles are subjected to high thermal and mechanical stresses. Signs of wear and damage, such as uneven abrasion, cracking or delamination of the friction material, can provide important clues to problems in the braking system. A professional damage assessment helps workshops to quickly identify the actual cause. This is because the causes often lie not with the brake pads themselves, but may, for example, be triggered by stiff brake callipers or malfunctions in the electro-pneumatic braking system. The following overview shows the most common types of damage to disc brake pads, their possible causes, and also recommended measures for a quick and reliable diagnosis.

1. Overheating

Overheating / Material damage

The friction material shows cracks, signs of rust and/or white edges

Possible causes:
  • Intensive braking
  • High thermal stress caused by problems with the brake callipers and/or brake discs
  • Overloaded vehicle
  • EBS malfunction
Effects:
  • Overheated friction material becomes brittle and cracks
  • Poor braking performance
  • Premature wear and tear
  • Delamination of friction material possible
Remedy:
  • Check the causes of overheating
  • Check the brake callipers and brake discs
  • Replace brake pads
2. Uneven wear

Uneven wear

Brake disc edge

Uneven wear groove on inner and/or outer radius

Possible causes:
  • New brake pads fitted to a heavily worn brake disc with a wear edge
Effects:
  • Reduced braking performance
  • Squeaking noises and rubbing
  • Overheating and premature wear
  • Delamination due to shear forces possible
Recommended measures:
  • Replace brake pads
  • Replace brake discs or rework them

Inside a brake calliper

Difference in thickness between inner and outer brake pads

Possible causes:
  • Guides that are stuck or stiff
  • Brake piston stuck or stiff
  • Brake calliper does not return to its rest position
Effects:
  • Brake imbalance
  • Overheating and/or premature wear
  • Reduced braking performance
Recommended measures:
  • Check/replace brake calliper
  • Replace brake pads

Within an axle

Difference in thickness between the brake pads on the same axle

Possible causes:
  • Brake calliper stuck or stiff
  • Faulty brake chamber
  • EBS malfunction
Effects:
  • Vehicle pulls to one side
  • Overheating and premature, increased wear
  • Reduced braking performance
Recommended measures:
  • Check the brake callipers
  • Check the brake chambers
  • Check EBS/ABS
  • Replace brake pads

Diagonal pad wear

Brake pad shows uneven wear on one side

Possible causes:
  • Warped brake calliper
  • Stiff guides
  • Damaged or dirty pad seats
Effects:
  • Noises
  • Overheating
  • Uneven braking pressure
Recommended measures:
  • Replace pads
  • Check or replace brake calliper

Grooves on the brake pad

The surface of the pad shows definite grooves

Possible causes:
  • Scoring marks caused by excessive wear
  • Dirt or foreign objects between the brake disc and the brake pad
Effects:
  • Reduced braking performance
  • Noises and rubbing
  • Incomplete contact between brake pad and disc
  • Overheating and premature wear
Recommended measures:
  • Replace pads
  • Service or replace brake discs
3. Thermal and mechanical delamination

Thermal delamination

Partial or complete delamination of the friction lining as a result of high thermal stress

Possible causes:
  • Intensive/aggressive braking
  • Overloading
  • Faults with the brake disc or brake calliper
  • EBS malfunction
Effects:
  • Poor braking performance
  • Noises
  • Brake pad completely damaged
Recommended measures:
  • Replace pads
  • Check brake discs and callipers
  • Check EBS/ABS

Mechanical delamination

Partial or complete separation of materials for mechanical reasons

Possible causes:
  • Wear edge on the brake disc
  • Incorrect fitting
  • Faulty or seized brake calliper
  • Excessive play
Effects:
  • Reduced braking performance
  • Noises
  • Brake pad completely damaged
Recommended measures:
  • Replace pads
  • Check the disc and brake calliper
4. Material and edge spalling

The friction material is damaged and has chipped or crumbled away at the edges.

Possible causes:
  • Thermal stress caused by a seized brake calliper
  • Mechanical stress caused by poor condition of discs
Effects:
  • Poor braking function
  • Premature wear and tear
  • Noise build-up
Recommended measures:
  • Identify cause of the overheating
  • Replace brake pads
5. Surface damage to the friction lining

Surface cracks

The brake pad has small cracks on its surface

Possible causes:
  • High thermal stress caused by intensive braking
  • Sticky brake calliper
Effects:
  • Vertical, hairline cracks do not pose an immediate safety risk, but nevertheless
  • Replacement recommended
Recommended measures:
  • Investigate the causes
  • Replace brake pads

Surface glazing

The surface of the friction lining is glazed.

Possible causes:
  • Short-term, intermittent overheating
  • Excessive use of the brakes during the running-in period
Effects:
  • Temporary reduction in braking performance
  • Noises and rubbing sound during braking
Recommended measures:
  • Mild glazing: no action required or for brake pads in new condition, lightly sand the surface evenly
  • Heavy glazing: Replace brake pads, check brake discs

Surface contamination

The surface of the friction lining is heavily contaminated with foreign matter

Possible causes:
  • Oil, grease or other kinds of foreign matter
  • Leaks from adjacent assemblies
  • Contamination during maintenance
Effects:
  • The vehicle pulls to one side during braking
  • Reduced braking performance
Recommended measures:
  • Identify and then eliminate cause
  • Replace pads
6. “Wobbly” brake pads

Damage to the brake pad supports and to the friction material

Possible causes:
  • Excessive play in the brake calliper
  • Worn pad seats
Effects:
  • Overheating
  • Noises
  • Premature wear and tear
  • Delamination of the friction material
Recommended measures:
  • Replace pads
  • Check/replace brake calliper
7. Incorrect fitting

Damaged brake pads as a result of incorrect fitting or application

Possible causes:
  • Wonky installation
  • Missing or faulty installation accessories
  • Incorrect spare part allocation
Effects:
  • Damaged pads
  • Overheating
  • Poor braking performance
  • Noises
Recommended measures:
  • Fit the pads in accordance with the manufacturer’s instructions
  • Check brake callipers and brake discs

Important, please note:

The types of damage, their causes and the measures to take described here are provided solely for general information and they also serve to assist with the diagnosis of brake components. They are not intended to replace the vehicle or component manufacturer’s specifications, nor a professional inspection carried out by qualified workshop staff.

All maintenance, repair and servicing work on braking systems is to be carried out in accordance with the relevant manufacturer’s instructions. The actual cause of the damage may vary depending on the vehicle, operating conditions and the condition of the braking system. No liability is accepted for the completeness, accuracy or applicability of the information provided.

Căutare piese de schimb
Nr. OE Identificarea manuală a vehiculului
Cei mai importanți producători
Alți producători
Seria de vehicule Înapoi
Vehicul Înapoi

Introduceți numărul OE în câmpul de introducere. De obicei, numărul OE se găsește pe piesa de schimb însăși sau în documentele vehiculului.

Căutare piese de schimb
De asemenea, identificați piesele de schimb cu numerele OE Informații detaliate despre produs Găsiți distribuitori en gros în apropierea dumneavoastră
dummy
Processing Selected Car
Poducători
Seria de vehicule
Vehicul
Puterea motorului
Cilindreea motorului
Tipul de combustibil
Anul de construcție
Codul motorului

Alegeți categoria:
Înapoi
dummy
Distribuie
Trimite prin Copiază linkul
Adresa URL a fost copiată în clickboard!
Numărul articolului
Number
Numărul articolului a fost copiat!
Căutare pe internet Instrucțiuni de montare
Mai multe detalii
Denumirea produsului Valoare
Mai puține detalii

Dealerul dumneavoastră
Autoteile Krammer GmbH
dummy
Lechstraße 1-3
68199 Mannheim
Afișează harta