Lamp setting on the BMW 530D F07

Scheinwerfer einstellen bei einem BMW 530d f07

Important safety note

The following technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for suitably qualified personnel only.

Step-by-step instructions

1

Vehicle and work preparation

Regardless of the SEG used, the vehicle has to be properly prepared before the actual measurement procedure or setting is started. This includes correct positioning on the lamp setting station, a detailed visual inspection and also the connecting up of a battery charger.

2

Reading the forward inclination

The next step is to read off the required forward inclination of the cut-off line for the lamp. In the BMW 5 series, this information is located directly on the lamp.

3

Aligning of the SEG

The SEG is now aligned to the vehicle with the aid of laser aiming.

4

Positioning of the SEG

After alignment to the vehicle, the SEG is positioned correctly towards the lamp using the laser pointer.

5

Testing the low beam

SEG IV

The test scale shows the measurement of the low beam on the SEG IV. This is set correctly in the example. If the scale deviates upwards or downwards, the lamp must be readjusted accordingly.

SEG V

With the SEG V, the test procedure is initiated via the device menu. Firstly, the vehicle to be tested is selected. The vehicle can be selected from the vehicle database (as in the example) or created manually. In addition, vehicles that have already been tested can be saved in a history and called up at a later date.

The menu is also used to enter the forward inclination angle, to select left-hand or right-hand drive and also to specify the adaptive front headlamp system (AFS).

The low beam test for the right-hand side of the vehicle is initiated by tapping the symbol. After confirming the positioning information, the measurement is taken and the result is displayed directly. In the example, the measurement result is OK.

6

Testing the high beam

Once the measurement of the low beam function has been completed, the test for the high beam is carried out accordingly on both devices.

7

Completion of the test (SEG V)

With the SEG V, the measurements carried out are displayed with the date and time once each test has been completed. The results are automatically saved in the measurement history and can be called up again later at any time.

Cât de util ți se pare acest articol?

Nu este deloc util
5
4
3
2
1
Foarte util
Succes

Captcha incorectă

Captcha incorectă

Eroare

A apărut o eroare

Căutare piese de schimb
Nr. OE Identificarea manuală a vehiculului
Cei mai importanți producători
Alți producători
Seria de vehicule Înapoi
Vehicul Înapoi

Introduceți numărul OE în câmpul de introducere. De obicei, numărul OE se găsește pe piesa de schimb însăși sau în documentele vehiculului.

Căutare piese de schimb
De asemenea, identificați piesele de schimb cu numerele OE Informații detaliate despre produs Găsiți distribuitori en gros în apropierea dumneavoastră
dummy
Processing Selected Car
Poducători
Seria de vehicule
Vehicul
Puterea motorului
Cilindreea motorului
Tipul de combustibil
Anul de construcție
Codul motorului

Alegeți categoria:
Înapoi
dummy
Distribuie
Trimite prin Copiază linkul
Adresa URL a fost copiată în clickboard!
Numărul articolului
Number
Numărul articolului a fost copiat!
Căutare pe internet Instrucțiuni de montare
Mai multe detalii
Denumirea produsului Valoare
Mai puține detalii

Dealerul dumneavoastră
Autoteile Krammer GmbH
dummy
Lechstraße 1-3
68199 Mannheim
Afișează harta