Lamp setting on an Audi RS 7

Scheinwerfer einstellen bei einem Audi RS7

Important safety note

The following technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for suitably qualified personnel only.

Step-by-step instructions

1

Preparation

The Audi RS 7 itself also has to be first prepared. This means the following: park at the standardised lamp station , connect the battery charger and visually inspect the lamps and their functions.

2

Correct alignment to vehicle

The next step is the SEG being correctly aligned to the vehicle with laser assistance.

3

Positioning

With the SEG IV, the device is optimally positioned to each individual light source with the aid of the laser pointer (for double lamps, repositioning is necessary for each one for low beam/high beam).

4

Reading and setting the forward inclination

The required forward inclination is read off the lamp on the RS 7 and set manually on the SEG IV using the rotary control knob on the device. With the SEG V, the setting is automatically taken over in accordance with the menu-guided vehicle selection.

5

Initiating the measurement

The measurement of the low beam is then initiated. The result can then be read on the scale on the device (SEG IV) or on the screen (SEG V).

6

Result of the low beam

The measurement results in our example confirm in each case a correct setting, which is then confirmed on the SEG V via the touchscreen. Our practical example for the Mercedes W212 on page 38 shows you what you need to bear in mind in the event of a deviating measurement result.

7

Measuring the high beam

The high beam is measured accordingly.

8

High beam result

In this case, too, the measurement results are OK.

9

Measurement procedure

The SEG V displays the successfully completed measurements.

The results are automatically stored in the history and can be called up again later at any time.

Cât de util ți se pare acest articol?

Nu este deloc util
5
4
3
2
1
Foarte util
Succes

Captcha incorectă

Captcha incorectă

Eroare

A apărut o eroare

Căutare piese de schimb
Nr. OE Identificarea manuală a vehiculului
Cei mai importanți producători
Alți producători
Seria de vehicule Înapoi
Vehicul Înapoi

Introduceți numărul OE în câmpul de introducere. De obicei, numărul OE se găsește pe piesa de schimb însăși sau în documentele vehiculului.

Căutare piese de schimb
De asemenea, identificați piesele de schimb cu numerele OE Informații detaliate despre produs Găsiți distribuitori en gros în apropierea dumneavoastră
dummy
Processing Selected Car
Poducători
Seria de vehicule
Vehicul
Puterea motorului
Cilindreea motorului
Tipul de combustibil
Anul de construcție
Codul motorului

Alegeți categoria:
Înapoi
dummy
Distribuie
Trimite prin Copiază linkul
Adresa URL a fost copiată în clickboard!
Numărul articolului
Number
Numărul articolului a fost copiat!
Căutare pe internet Instrucțiuni de montare
Mai multe detalii
Denumirea produsului Valoare
Mai puține detalii

Dealerul dumneavoastră
Autoteile Krammer GmbH
dummy
Lechstraße 1-3
68199 Mannheim
Afișează harta