All light functions – tail lamp, stop light, direction indicator, rear fog lamp and back-up lamp – on the new full LED rear combination lamp for trucks from HELLA feature LED technology and can be combined with a reflex reflector. This light is suitable for both horizontal and vertical installation. It can be mounted from the front with fixing screws or from the back with fastening bolts. The rear combination lamp features an impact-resistant lens and is designed to withstand strong shocks and vibrations. Different variants with and without pulsing for indicator failure checks, with various frame colors and with triangular reflex reflectors, are available. It features the IP 6K9K degree of protection.
The LED rear combination lamp from HELLA, which can be mounted horizontally or vertically, provides the advantage of implementing all light functions in LED technology – for maximum efficiency and lighting. The innovative and patented flat LED light guide from HELLA is just one of several products to offer this advantage. The LEDs generate optimum illumination and consume significantly less power than conventional bulbs. Another plus is the lengthy lifetime of the light emitting diodes, which can last the lifetime of the vehicle depending on the ambient temperature. Since there is no need for maintenance or replacements, the service costs are very low. Intelligent thermal management is used to protect LEDs from overheating and subsequent failure. An indicator failure check is optional with the full LED rear combination lamp: This enhances safety as the vehicle electronics system immediately detects any malfunction of the indicators and warns the driver at once. You can also express your individuality through various frame colors and diverse mounting options.
Functions: Taillight, brake light, direction indicator, rear fog lamp, reversing light with a square reflex reflector
Dimensions: 300 x 130 x 40 mm
Operating voltage: 12 V / 24 V
Type approval: ECE / ADR / EMC, E24 5879 and 5880 / E24 10R 04 0071