FULL-LED REAR LAMP FOR 24 V TRUCK AND TRAILER
Truck
FULL-LED REAR LAMP FOR 24 V TRUCK AND TRAILER
06/14/2021
MFL_Truck_530x300px
MFL_Dimensions_Truck_530x300px

FULL-LED REAR LAMP FOR 24 V TRUCK AND TRAILER

The full-LED rear lamp for 24 V truck and trailers impresses at first glance with its innovative design. The patented LED light curtain is particularly striking with a surface area of 144 cm² for the tail light and the reflex reflector behind it, as well as the dynamic direction indicator light. Due to the large light surface, it ensures optimal visibility of the vehicle, which guarantees a high level of safety.

The new rear lamp is also exceptionally robust. The lens is bonded to the housing and the two colour polycarbonate (PC) external lens is impact-resistant. Overall, the rear lamp achieves protection class IP 6K9K, which means that it is not only dustproof but also high-pressure jet cleaner resistant. With a size of 410 x 140 mm and an installation depth of just 55.5 mm, it is also extremely compact.

The electronics also meet the highest demands. The high-performance LEDs enjoy a long lifetime and low power consumption. In addition, control for the flashing side marker lamps, direction indicator failure control and load simulation for the stop and direction indicator lights are integrated into the system. This ensures a high level of compatibility.

Another advantage of the rear lamp is its future viability. It has a mechanical interface for sensor technology, meaning that ultrasonic sensors can be connected on both sides, for example.

All relevant information about the product you will find here.

06/14/2021

Operating voltage: 24 V

Light function: Tail light (12 red LEDs), Stop light (12 red LEDs), Direction indicator light (6 amber LEDs), Reverse light (12 white LEDs), Rear fog light (5 red LEDs)

Light source:  LED

Material: Two colour external lens made of polycarbonate (PC), housing made of PC-ABS

Weight: ~ 1.900 g 

Storage temperature:  - 40°C to + 90°C

Protection class: IP 6K9K 

Type approval: ECE E24 148R-00 5934, 150R-00 5934

EMC protection: EMV E1 10R-06 9011 (ECE-R10)

Mounting: With M8 fastening bolts

Connection: Central 7-pin DIN-bayonet connector, 2-pin AMP SUPERSEAL connector for auxiliary lighting functions

All relevant information about the product you will find here.

06/14/2021
  • Print
DAF LED HEADLAMP
Picture

The first LED headlamp for commercial vehicles by HELLA.

HELLA Shapeline
Picture

Experience individuality in its most beautiful form with

HELLA Shapeline