Mitsubishi Grandis - Brake light switch failure | HELLA

Mitsubishi

Grandis

Model year: 02/2004 to 03/2008

Engine: 2.0 16V Di-D / 2.4i 16V

Brake light switch failure

If a complaint is made about the TSC lamp ("Traction control") and/or the ASC lamp ("Active stability control") lighting up in the above vehicle, this may indicate a faulty brake light switch.

A faulty silicone seal can lead to moisture getting into the brake light switch.

This moisture can lead to a malfunction or complete failure of the brake light switch.

The vehicle manufacturer has already addressed the issue.

The brake light switch should be checked, and replaced with a modified brake light switch if necessary, in the specialist workshop.

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.