BMW i3 - Service connections for air conditioning system | BEHR HELLA



Model year: from 08/2013

Service connections for air conditioning system

During maintenance or repair work on the vehicles listed above, the question "Where are the service connections?" arises.

To access the service connections, proceed as follows:

  • Open the hood
  • Clear out the charging box (charger etc.); Figure 1
  • Remove the screws from the charging box (6x) (Figure 2)
  • Remove the right-hand covers next to the charging box (Figures 3+4)
  • Remove the left-hand cover next to the charging box
  • Take out the charging box
  • The service connections are now visible (Figure 5)

Note: The vehicle's air conditioning system contains the refrigerant R1234yf. Quantity: 750 g

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only. Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.