Mazda 3 - Display for outside temperature | BEHR HELLA



Model year: 2006-2009

With automatic air-conditioning system

Display for outside temperature

In the above vehicles, the display for the outside temperature may change of its own accord.

The temperature on the display unit of the air-conditioning system's control panel (°C/°F, see drawing) may change when the power supply is disconnected. This is caused by a battery that has been discharged, disconnected or replaced previously. The replacement of a fuse may also play a role.

In order to change the ambient temperature unit (°F/°C) on the display back again, proceed as follows:

- Switch on the ignition and wait until the ambient temperature is displayed

- Switch on the radio/audio system

- Press and hold the "Power" button, then press the "Media" button at the same time and hold for 5 seconds

- Release the "Media" button first, then the "Audio" button

- Switch the ignition off and on again

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.