Ford Edge - Noise and loss of power during acceleration phase

Data sheet
ManufacturerFord
Vehicle modelEdge
Engine2.0 Diesel | All models
Year of manufactureFrom April 15, 2019
SymptomsNoise and loss of power during acceleration phase

Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

In the case of the Ford Edge, noise and loss of power occur during acceleration

With this repair job, the customer complains that a humming noise can be heard during acceleration accompanied by a loss of power.

 

In this case, the cause of the above problem is a leak in the hose connection between the turbocharger and the intake air flap actuator, also called intake air damper.

 

Check the entire air supply system from the air filter to the engine for any kind of leakage. If no further damage can be detected, replace the intake air hose connection between the turbocharger and the intake air damper (OE part number: 2414667).

 

  • Dismantle the air filter housing and the air intake pipe.
  • Remove the hose (see Fig. 1) between the turbocharger and the intake air damper.
  • Check connection openings and surfaces (turbocharger and intake air actuator) for contamination / damage and clean and repair if necessary.
  • Fit the new hose and check that it is correctly seated.
  • Refit the air filter housing and also the air intake pipe. 

 

Finally a test drive should be performed in order to run checks on the repair work.

Please note

Please note that such work should only be carried out by an authorised specialist workshop and that the vehicle manufacturer's repair and maintenance instructions must be observed!


This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all

Very helpful

Please tell us what you did not like.

To get the free HELLA TECH WORLD newsletter.

Many thanks. But before you go.

Sign up for our free HELLA TECH WORLD newsletter to receive the latest technical videos, car repair advice, training course information, marketing campaign details and diagnostic tips.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.

SIGN UP NOW!

To get the free HELLA TECH WORLD newsletter.

Show additional information on our newsletter Hide additional information on our newsletter

Register for our free HELLA TECH WORLD newsletter to stay up-to-date with the latest technical videos, car repair advice, trainings, diagnostic tips and marketing campaigns.

Together we can get cars back on the road quickly!

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Please note:
You will only be subscribed to the newsletter once you have clicked on the confirmation link in the notification e-mail you will receive shortly!

Data Protection | Unsubscribe

Almost there!

All you need to do is confirm your sign up!
We've sent an e-mail to your email address.

Check your inbox and click on the confirmation link to start receiving HELLA TECH WORLD updates.

Wrong e-mail or no confirmation received?
Click here to enter it again.