Seat Ibiza (KJ) - Atypical steering behavior | HELLA

Seat

Ibiza (KJ)

Model year: 01/31/2017–07/13/2017

Chassis number: …000324 – …029443

Atypical steering behavior

Annoyances in the steering system

If the problem described above is determined, the cause could be an insufficiently secured steering column.

In this case, there is the possibility that the screw (see image) was not tightened to the specified tightening torque when the steering column was fitted.

This can lead to inconsistencies in the steering behavior.

Remedy:

Have the vehicle checked immediately in an authorized specialist garage.

The tightening torque of the screw is checked and it is tightened to the correct tightening torque specified by the manufacturer (20Nm + 180°), if required.

The action is documented with a sticker and the lettering "45N7" in the area of the spare wheel well.

The vehicle manufacturer has already addressed the issue and notified owners of all models affected. For various reasons, however, it must be assumed that not all vehicles have been checked or modified.

Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.

The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.