If a complaint is made regarding the above-mentioned fault in one of these vehicles, the possible cause is bad contact on the 12-pin multiple connector of the instrument panel.
Fault analysis is to be carried out by visibly checking the 12-pin multiple connector of the instrument panel. If the multiple connector has a transparent cover, it is to be replaced by the modified model provided by the manufacturer.
In addition, the electrical contacts / leads in the area of the instrument panel are to be visibly checked to ensure proper plugging in and correct cable laying.
Connector cover:
Spare part no.: 61.13.8.365.906
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful